Quote:
|
7JP4 a little weak, crank it up to the full 10K and viola!
|
Eric,
It sounds good, but really won't work on electrostatic tubes. As you raise the HV it takes more voltage to deflect the beam. After about 6KV you can't deflect the beam across the tube, picture does get a little brighter but you get a smaller and smaller raster.
Also the way this is designed you won't be able to get the full 10KV, to keep the 6vac current close to the 6V6 filament current the maximum output of the doubler is about 12vdc at 180madc so with the 1.2v drop of the LM317 you can only put about 10vdc into the HV module which limits you to about 6.6KV
I'll email you a jpg of the schematic tomorrow.
Chuck