View Single Post
  #10  
Old 09-03-2007, 05:35 PM
John Folsom's Avatar
John Folsom John Folsom is offline
VideoKarma Member
 
Join Date: May 2004
Location: Melbourne Florida
Posts: 932
Eric,

As Dave A. said, it works on 3KP4s, and I have made adapters for 7JP4s, 3NP4s, 7EP4s, 15GP22s, and and 19VP22s. It seems to work well on any of them. I have noted that many weak 7JP4s don't seem to show much improvement after rejuvenation. And I have had some 10/12" tubes (10BP4 etc) that were so worn out they would show no improvement. But the Beltron is my favorite tester. If for no other reason, its ease of set-up.

The downside on the Beltron is that it does not measure beam current in any kind of linear fashion. All you get is a relative indication of goodness. And it does nothing to indicate gassy tubes. But I have not found this to be a handicap.

Heathkit made a similar looking machine, but I have not had any experience with it. Anyone know if the Heathkit works as as well as the Beltron?
__________________
John Folsom
Reply With Quote
Audiokarma