Thread: I Love Trash!
View Single Post
  #38  
Old 08-27-2007, 12:08 AM
radiotvnut's Avatar
radiotvnut radiotvnut is offline
VideoKarma Member
 
Join Date: Jul 2007
Location: Meridian, MS
Posts: 6,025
Quote:
Originally Posted by Adam View Post
It worked at first, but after about 30min, I started to have problems with it (see 1st picture). At first I thought it was a horiz problem, but I swapped the horiz module with no difference. After a while it started to loose horiz sync, sound, picture and all, then I thought it was the tuner and cleaned the pins and sockets going to the tuner, and resoldered some of the ground and B+ connections, but that didn't do it. Then I noticed it worked good if I turned to a station with a weak signal, so I tried to adjust the AGC and that didn't help, then I swapped out the entire AGC board, and that fixed it.
I've had plenty of Zenith tube sets as early as a '61 b/w and as late as a '71 4 tube chromacolor, work when I brought them home and stay working for years, I still have a 1970 23" b/w in the metal cabinet with all original parts in it, tubes and caps and everything, that works great, but everytime I bring home one of these chroma IIs they always seem to need something.
You might want to change the caps on the old AGC board and see if that fixes it. Then, you'll have a spare board. I tend to agree about the CCII's needing something. Even though they were good sets; I've always had to do something to the ones that I found. I hated to get one where the tripler failed and took the flyback and HOT with it. A lot of the older Zeniths worked or just needed minor adjustment when I got them.
Reply With Quote