View Single Post
  #13  
Old 08-25-2007, 12:26 AM
Squeakit
Guest
 
Posts: n/a
Glad to see that my question stirred up some interest. Today I removed the amplifier board from an amplified indoor antenna, connected the r.f. modulator thru a matching transformer to the VHF input, and a 4 foot length of wire with an alligator clip on one end to the output. Fired it up and got an acceptable picture and sound about 18 feet away, but it's very touchy as to the position of the wire and the location of the TV. Tried clipping the output to various metal objects and also tried the rabbit ears, but it seems to work the best with just the length of wire.

I am going to keep looking for more antenna preamps at the Salvation Army. My thought is to connect 2, 3, or 4 of these preamps in a daisy chain and maybe wind up with a decent signal that will allow me to move about the house with my little receiver.

I also thought about tuning the antenna wire by varying it's length, but I don't know the correct length for VHF channel 3. Also thought about using a variable capacitor. Any suggestions would be appreciated. I want to keep this very simple and low budget. Keep these great ideas coming! Thanks.
Reply With Quote