View Single Post
  #10  
Old 03-15-2004, 08:01 AM
Chad Hauris's Avatar
Chad Hauris Chad Hauris is offline
VideoKarma Member
 
Join Date: May 2003
Location: West Texas
Posts: 2,085
Also I have had this happen when the ground connection has loosened from the CRT. There is arcing from the CRT outer coating to the ground, causing the arcing noise in the picture...if the ground connection comes loose enough, the HV filter capacitance is lost, causing the voltage to drop and the picture to go dim.

Check along the CRT grounding spring...make sure there is a good firm connection between the grounding spring, degaussing shield, and chassis. The main CRT to chassis ground connection is a metal strap that is attached to a corner of the CRT, it contacts the chassis through one of the front chassis mounting bolts.
Reply With Quote
Audiokarma