View Single Post
  #6  
Old 08-24-2007, 06:46 AM
ChrisW6ATV's Avatar
ChrisW6ATV ChrisW6ATV is offline
Another CT-100 lives!
 
Join Date: Feb 2007
Location: Hayward, Cal. USA
Posts: 3,552
Quote:
Originally Posted by Squeakit View Post
I would like to know if the signal from a $20 r.f. modulator can be amplified so that it will broadcast without connecting a cable. I have a collection of small TV's and enjoy watching old B/W movies on them. I want to be able to go to any room in the house, plug in my little TV, extend the antenna, and receive the movie on my DVD through the TV (ch.3 or 4). I have a Gemini Rabbit system that works fine, but I want to eliminate the receiver. Anyone know if this can be done?
Yes, it can be done. Maybe with an antenna preamp attached to the output of the modulator, and a pair of rabbit ears or a folded dipole with a 300-to-75-ohm transformer attached to the preamp output.

It is, however, as some others here have hinted, basically illegal to do this sort of thing, strictly speaking. Back in the 1970's, my first Atari 2600 video game system had a big notice warning me not to connect an antenna and the game switch to the TV VHF terminals at the same time. Of course, I did that right away. We looked at Channel 3 on my brother's TV in his room down the hall. "Hey-there's Air-Sea Battle!"

My ham radio license lets me do things like this legitimately, but on specific frequency bands, and no commercial content or music in our signals, etc.

Once analog TV goes away in 2009, especially if few signals stay on the VHF channels, I expect many of us collectors will want to start trying things like this for our old TV sets.
Reply With Quote