View Single Post
  #4  
Old 08-17-2007, 06:12 PM
Findm-Keepm's Avatar
Findm-Keepm Findm-Keepm is offline
Followin' the Rules...
 
Join Date: Jun 2007
Posts: 2,857
Doug,

My Zenith "Numerical Parts Price List with Recommended Substitutions" dated February of 1974 states that both of your part numbers were superceded by part number 63-7621X (or as Zenith puts it, 063 07621 X). The YR UD (year updated) is 1970 for the 63-7620 and 1973 for the 63-7076.
Price for the 63-7621X is listed as $1.45.

My June 1974 "Numerical Parts Price List with Recommended Substitutions" shows part number 800-0327 (a kit?) to be a suggested replacement. The 800-0327 is skipped over in the same listing, so it may have been short lived.

If it's a standard convergence pot, they were available in about 6 or 7 resistances - clarostat replacements are the U-39 series (sorry, no knob, just a + slot). Workman sourced about all of the values, but they aren't around anymore either. I wonder if RCA or GE ever used a 130 ohm pot? I'll check my stock. One other possible source - some computer monitors used a convergence-style pot for horizontal centering. I've got a 100 ohm used one in my parts drawers.

Hope this helps -
__________________
Brian
USN RET 22YRS (Avionics/Cal)
CET-Consumer Repair and Avionics ('88)
"Capacitor Cosmetologist since '79"

When fuses go to work, they quit!
Reply With Quote