View Single Post
  #3  
Old 07-28-2007, 04:05 PM
3Guncolor 3Guncolor is offline
VideoKarma Member
 
Join Date: Mar 2005
Posts: 312
Andy,
I took a look at the solder on the drive transformer and found it was cracked. I should have known better, on this set I had to resolder the vertical output a few years ago due to the same problem. I'm going to order the parts one more time and see what happens. I'm also going to check all the connections on the horizontal area. I was thinking it could have been a drive problem but I couldn't find anything wrong. I'm getting older and my eyes are not as good as they used to be. After I looked at it through an eye peice it was easy to see. Thanks for your input you might save me from having to buy a new LCD set my family is bugging me about. We wanted to use this set until the new sets get better and maybe cost less.
Steve
Reply With Quote