View Single Post
  #8  
Old 07-11-2007, 05:47 PM
Kiwick's Avatar
Kiwick Kiwick is offline
slave to 3 equines
 
Join Date: Mar 2007
Location: Italy
Posts: 448
Quote:
Originally Posted by dr.ido View Post
Tubes and nixies in a set made in 1983! Any chance of a picture?
Here are some pics

The chassis has 5 tubes, one each in the horizontal oscillator, in the horizontal output and damper circuits (the HV rectifier is a solid state diode), in the vertical output and in the audio power amplifier

The rest of the circuitry is based on silicon transistors, with two ICs (for the IF and vertical oscillator/sync separator i think) and of course a few other ICs and a microcontroller in the electronic tuning/remote function module, the tuner itself is a varactor unit

The hybrid chassis in this 1983 portable dates back to the very early 70s, i also have a REX 23" wooden tabletop set from 1972 fitted with the same identical hybrid chassis but with a "car radio style" mechanical preset pushbutton tuner... apart from the tuner there are absolutely NO differences between the 1972 and 1983 chassis... other than MFG dates on components, which range between 8245 and 8304 in the 1983 set (the 1972 set also has a quality control sticker inside with a May 11, 1972 date written on it)

Note the slider pots for volume, brightness and contrast, they're quite quirky in that their maximum position is at the bottom and the minimum is at the top, on the side of the set are the 8 touch sensitive pads to control the electronic tuner (preset +/-, tuning +/-, fine tuning +/-, store/cancel) the preset memory is lost when the set is disconnected from the AC mains for more than about 30 seconds

Sadly this 1983 set has a really dim (almost black) picture, i'm not sure if i have a shot CRT or a faulty video circuit
Attached Images
File Type: jpg rex.jpg (174.9 KB, 36 views)
File Type: jpg rex2.jpg (88.7 KB, 40 views)
File Type: jpg rex3.jpg (67.8 KB, 31 views)
Reply With Quote