View Single Post
  #59  
Old 06-29-2007, 08:33 PM
Chad Hauris's Avatar
Chad Hauris Chad Hauris is offline
VideoKarma Member
 
Join Date: May 2003
Location: West Texas
Posts: 2,085
The socket saver I don't think would work in this case. If the old socket is cracked and broken it can cause some of the contacts to be loose on the tube and a new socket should solve the intermittency. I would solder buss wire from each pin on the new socket back to the corresponding next solder joint on the PC board trace just to make sure you have a good connection.
__________________
Chad Hauris
http://www.youtube.com/user/retrochad
Reply With Quote