Quote:
Originally posted by wa2ise
The horiz hold control, seen in your picture of the chassis, is a pot. There should also be a coil in the horizontal osc circuits. It should have a ferrite slug that can be adjusted. Try, with a plastic diddle stick designed for the purpose, adjusting it. Maybe the slug fell out?
|
Hello,
The Horizontal hold is actually a coil, it looks like a pot because is is mounted along two other pots, but it goes through that piece and into a coil. The problem with this set is that there seems to be no other hozizontal contorl coil on the chassis, perhaps something that was eliminated on a small set like this to save cost??
Thanks for the help,
Max M.