|
What capacitor are you talking about, exactly? C225A?
Which potentiometers are you talking about? The vertical and horizontal centering controls (R181, R211) are listed at 20 ohms on my schematic. The vertical hold control (R172) is listed at 1 megohm and the horizontal hold control (R168) at 50K ohms.
"Almost 100% certain" is not quite good enough when you're talking about the polarity of electrolytic capacitors. I would very carefully doublecheck the wiring of every electrolytic against the schematic. Burning up a new electrolytic suggests there is a wiring mistake somewhere.
Phil Nelson
|