View Single Post
  #5  
Old 06-03-2007, 12:51 PM
cpu_
Guest
 
Posts: n/a
I figure the Space Command module provides a current path, via the gray wire, for the power transformer. The Space Command must always be hot (black, blue) so that it can respond to the power on command from the remote. When it gets the command it provides a current path on the gray wire to feed the line AC to the xfmr. The white wire (common) to the pwr xfmr is always connected.

I didn't take apart the Space Command A-7550 module. I would need to unsolder a 3-terminal TO-220 device in the module housing to disassemble it. I will take it apart and trace the circuit, unless someone can provide a schematic?

Here is what the A-7550 Space Command module looks like:
Attached Images
File Type: jpg zen_19KC52_ac-line_control_module.jpg (49.5 KB, 50 views)
File Type: jpg zen_19KC52_ac-line_control_module_label.jpg (17.5 KB, 39 views)
Reply With Quote
Audiokarma