|
I went to factory training for that same model/series years ago,they are loaded with surface mount capacitors that WILL be bad,the bad caps can show problems like bad heads,but actually panasonic found you can really double the number of head hours before replacement,it is in editor with flying erase heads,and trust me.. you will want to recap all of the boards,even remove sheilds around head preamp..all will hive High ESR and they smell horrible once you heat them up to remove them.. but there is a trick to removing them,you can simply "twist" them at the base and pop them off,but rarely you can pull a trace,there is not much solder holding the surface mount caps for this reason,they were held in place by a type of glue before the boards went thru a wave soldering bath..you have to have a video monitor hooked up to "monitor out" to get to the menu and service menu area..
brings back memories of the 90's..LOL
|