|
Thoughts on crumbling PCBs
I had a Silvertone roundie color TV (21") that I got from a neighbor in my old neighborhood in 1970. Got it working fairly well--well, I got it working after a fashion, but the convergence was never right, the color sync went bad within a year or so, and to top it all off I was seeing hum bars in the picture around early 1973. However, as far as the PCBs in this set were concerned, yes, I have to agree; they were very brittle, crumbling at the drop of a hat. The video output tube socket broke right out of the video PCB in this TV, with a sickening crunch, when I was trying to replace the tube. No doubt the board itself (not to mention every other PCB in the set) was every bit as brittle as you say, as well. Wouldn't have surprised me one bit if the video board or any other on the metal chassis (yes, the set did have a metal chassis, not one large PCB like in the cheap portables--what few small analog sets there are anymore--we see nowadays) would have crumbled to pieces just by breathing on it wrong.
I can only hope today's sets, even with their one-PCB construction, have boards that last more than a few years before breaking. I think the modern ones are built to last somewhat longer, as they are made differently than the first-generation ones were; with better (more heat-resistant) materials, for one thing, not to mention much less overall heat in the entire set because of the solid-state circuitry (the only vacuum tube in any modern standard CRT television these days is the CRT itself; even projection HDTVs have at most three CRTs). The 1st-generation boards were phenolic, which didn't stand up to high heat very well; this is why a lot of early PCB sets had cracks around the horizontal-output tube socket and flyback. I think the video-output board in my Silvertone roundie must have been made of this material, and that a lot of those sets had the same problems with broken tube sockets, etc. after a few years.
__________________
Jeff, WB8NHV
Collecting, restoring and enjoying vintage Zenith radios since 2002
Zenith. Gone, but not forgotten.
|