View Single Post
  #8  
Old 03-05-2007, 11:48 PM
ohohyodafarted's Avatar
ohohyodafarted ohohyodafarted is offline
Bob Galanter
 
Join Date: Sep 2005
Location: Whitefish Bay, Wi (Milwaukee)
Posts: 1,080
The clearcoat I use is an industrial acrylac lacquer. And today because of the EPA and the rules about high VOC products that polute the environment, the price of this stuff has reached $150/gallon. Back in the 70's you could buy the same stuff for about $25/gallon. As for looking like a bar top... the addition of flateners to any glossy clear finish can easily create a very nice original looking satin finish.

I have a EPA mandated license to do referigeration work. Do you have any idea what the price of referigerant went up to when the government regulated it's use and disposal? Any time the Government gets it fingers into something it is going to cost you big time.

I have also used other products shuch as Deft, and various types of varnishes in refinishing furniture, but I like the durability of the acrylac lacquer, and the fact that it is easily sprayable and very fast drying. I use shellac for 2 coats over the stain as a sealer. Then I spray several coats of lacquer, wet sanding between coats to get a nice finsh.

Everyone has their own method of refinsihing furniture and preference of various types of materials for finishing.

I have a 19" Dumont. A most magnificent peice of furniture. Unfortunately the previous owner decided to try and refinish the top of the set. It has what looks like coagulated varnish covering the top. Oh God so ugly. So what do you do? Leave this botched mess, or refinish? I think fixing the yuck is preferable to leaving it ugly.

So many projects....so little time ... thanks for all the input
__________________
Vacuum tubes are used in Wisconsin to help heat your house.

New Web Site under developement
ME http://AntiqueTvGuy.com
Reply With Quote