View Single Post
  #26  
Old 02-26-2007, 05:01 AM
dr.ido's Avatar
dr.ido dr.ido is offline
VideoKarma Member
 
Join Date: Mar 2005
Location: SE Melbourne, Australia
Posts: 550
I can't get an image with composite video with either the BNC input or the peritel input, just a grey raster with some noise in it.

I can get something approaching an image (well some color at least) with an RGB source connected to the peritel input, but it won't sync up. I tried swapping pin 16 and 20 on the connector, but that didn't help so I must have remembered it wrong. I may be able to get the schematic, so I'll go from there.

From what I've been able to get so far I think my CRT is a bit tired, but it should still be watchable if I can fix the composite/sync problems.
Reply With Quote