Thanks everyone for all of the advice. Last night I opened the back and got a good look inside. I suppose my initial impression was that it was really dusty in there. Can anyone recommend a good method of cleaning the chassis and attached equipment without causing any damage. I mean I imagine using Fantastic is not the best idea, LoL. Also, I was able to locate the selenium piece which I have believe I should replace, and took a look at the caps. Only one was black with stripes which I had previously read should probably be replaced. Unfortunately, I was unable to locate the location of the lightbulb for the dial, can anyone point me in the right direction.
Please forgive me in advance for the amateurish questions, this is totally alien to me, but I am a quick study and appreciate every bit of advice and information you can give me. To be totally honest, I have never soldered anything in my life before, however, as I work in a bookstore, I have access to tons of books on basic wiring and electronics, etc.... and plan to pick one up and toy around with some basic electronics kits to get proficient in everything before I attempt to change out any capacitors or filters.
For starters I am most interested in repairing the lighted dial look, cleaning out the inside and using contact cleaner to clean the volume connection as the radio crackles when I turn the radio knob before settling on a particular volume level.
Will let you know how it goes as well as post a couple before and after pics
Thanks again!
Scott