andy,
I remember those sets. I don't like the design, however, for the simple reason that it is impossible to change channels if the power tuning mechanism is not working. Why Zenith did not design this model with a manual channel selector to back up the motor drive is beyond me.

This was unusual for Zenith, as most of their remote sets of that era with power tuning indeed did have a manual selector knob at the back of the set, so that the user could still operate the tuner if the power tuning drive was inoperative for any reason. The other drawback of this system, IMO, is that the automatic off function would not work either if the power tuning is itself defective (unless, of course, there was a manual on-off switch on the front panel).
I agree as well with your statement that the drive gears between the power tuning motor and the tuner probably were stripped or broken if someone tried to turn the channel selector drum manually. I think this problem occurred quite frequently with these sets when the motor drive failed; people tried to turn the drum by hand, promptly damaging the gear train.
Zenith's SC100 remote left a lot to be desired. This remote only allowed for one-way channel selection (and, of course, the auto-off function which could be set to trigger on any unused channel, not to mention channel skip for bypassing unused channels), but did not have mute or any of the other functions we now take for granted in today's IR remotes--such as complete home-theater control. (Magnavox had this, using ultrasonic control, in its high-end three-way entertainment centers of the '60s, but the control systems were mechanical nightmares comprised of very complicated mechanical drives, linkages and the like, not to mention the remote receiver itself with its own tubes and circuits. The system was set up to control TV tuning up/down, volume, mute, record changer operations and I don't know how many other control functions. My best guess is that, when these TVs got a few years on them and the remote systems began wearing out, the owners simply left them alone, as long as the TV and stereo still worked halfway decently.)
Zenith's later Space Command remotes were much better, allowing for up/down channel selection (two-way drive), volume up/down/mute, motorized remote tint/color adjustments and other refinements. However, I think today's IR remotes operate even better than Zenith's best ultrasonic systems, with more functions than those early sets--and let us not forget, today's remote systems (and the TVs themselves, of course) have no tubes to short, get weak or burn out. I have an RCA RCU800-B universal remote which I have set up to operate my TV, VCR and stereo (all separate components), and it works great. The only thing I have yet to figure out is how to get it to operate the transport functions of my bookshelf system's dual cassette decks and AM/FM tuner scanning. (Ironically, it works just as it is supposed to with the system's CD player.) There must be an IR code I haven't discovered yet--back to the manual, I guess. There are about six or possibly more control codes for my Aiwa system, some of which I haven't tried yet--oh well, maybe I'll work on it tonight. Can't be that difficult to figure out.