Videokarma.org TV - Video - Vintage Television & Radio Forums

Videokarma.org TV - Video - Vintage Television & Radio Forums (http://www.videokarma.org/index.php)
-   Rectangular Screen Tube Televisions (http://www.videokarma.org/forumdisplay.php?f=45)
-   -   12" Sony CRT on eBay (http://www.videokarma.org/showthread.php?t=30823)

Eric H 01-30-2005 04:46 PM

12" Sony CRT on eBay
 
NOS BIN $65

http://cgi.ebay.com/ws/eBayISAPI.dll...150745189&rd=1

andy 01-30-2005 07:47 PM

I'd hold off on hitting buy it now considering I just bought two for $10 after no one bid the first time around.

Eric H 01-30-2005 09:47 PM

Quote:

Originally Posted by andy
I'd hold off on hitting buy it now considering I just bought two for $10 after no one bid the first time around.

Good idea! :yes:

Wish I could find a NOS 27" Sony tube.

andy 01-30-2005 11:11 PM

Have you tried looking for a good used 27" CRT? The 27" Sonys from the late 90's seem to fail long before the CRT gets weak. I once used on in an 80's set and it worked very well.

kc8adu 01-31-2005 04:44 AM

Quote:

Originally Posted by Eric H
Good idea! :yes:

Wish I could find a NOS 27" Sony tube.

what number?
i have a set that swallowed a bolt of lightning early in life.
tube should be good.

Eric H 01-31-2005 10:33 AM

The set it goes in is a KV27XBR10 built Dec 1989
The tube is an A68 something something, I'll have to pull the back to be sure.

They are available from Hawkeye or VDC but I don't want to spend that much!

andy 01-31-2005 12:40 PM

I think just about any 27" CRT will work in that except for the fake trinitrons of the mid 90's. Sony made a bunch of CRTs that used a regular in-line gun instead of the single lens trinitron gun. Obviously, the yoke and pinout would be completely different on those. You will probably have to set the H Stat control all the way to one extreme to get a recent CRT to converge because their newer CRTs are designed to have that pin grounded instead of adjustable.

kc8adu 01-31-2005 02:56 PM

i changed a bunch for a local company and since they had no dud value i busted off the neck of one for study.
gun looks identical to the crap zenith guns.
these tubes go in the ohio e check monitors.
within a year they look like hell again.

Quote:

Originally Posted by andy
I think just about any 27" CRT will work in that except for the fake trinitrons of the mid 90's. Sony made a bunch of CRTs that used a regular in-line gun instead of the single lens trinitron gun. Obviously, the yoke and pinout would be completely different on those. You will probably have to set the H Stat control all the way to one extreme to get a recent CRT to converge because their newer CRTs are designed to have that pin grounded instead of adjustable.


kc8adu 01-31-2005 02:58 PM

iirc this one is a a67jhg
Quote:

Originally Posted by Eric H
The set it goes in is a KV27XBR10 built Dec 1989
The tube is an A68 something something, I'll have to pull the back to be sure.

They are available from Hawkeye or VDC but I don't want to spend that much!


Eric H 01-31-2005 07:45 PM

partsolver.com says it's a
A68JMT50
Part Number: 8-737-753-05
Not available.

And no doubt too expensive if it was! :cry:

andy 02-01-2005 12:24 AM

The seller dropped the price of that 12" to $15. Now it's not such a bad deal.

jstout66 02-01-2005 10:52 AM

why did Sony use "fake" CRT's in the mid 90's? I don't think they use a true Trinitron tube now, which I don't understand because that tube was such a "step above" what everyone else was doing. Just curious.

andy 02-01-2005 02:06 PM

From what I've seen repairng many Sony TVs and monitors, they've made a number of changes to their CRTs.

For TVs, they started making some models with a CRT that had a regular in-line gun. They seemed to do this for a few years in the mid 90's on their "V" line of TVs. They may have used them on other TVs, but I haven't seen any. Fortunately, they seem to have abandoned this on more recent TVs. All the flat screen Wega sets I've seen had sinlge lens trinitron guns.

In computer monitors, they stopped using the single lens gun in about 1997. They replaced it with a complex in-line gun which they still use today on their monitors. These guns have extremely good focus compared to their older monitors, but that may just be from other improvements. I've seen a lot of weird failures in these CRTs (mostly major focus and convergence shifts). I think it's caused my a resistor network that's built into the neck of the CRT.


All times are GMT -5. The time now is 01:02 PM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.