Curtis Mathis
 

Did they still have round CRT color sets in 67?

That's the claim for this Curtis Mathis

http://cgi.ebay.com/ws/eBayISAPI.dll...item=742219129

I used to watch the 6 Million Dollar man and Charlies Angels on a neighbors set similar to this, I think it was in a bigger cabinet though.

Eric

Eric,

I thought most manufacturers made the switch to rectangular in '66. Maybe this is an early '66 model that wasn't actually sold until '67. Looks like it has an RCA TV chassis.

Curtiss Mathis
 

I have a Curtiss Mathis round color set in my in-basket. It is complete except for the knobs. It is definitely RCA chassis. I'm most interested in it for parts as it has a good CRT. Not big on the cabinet style. It is my only C.M. set in the collection. I'm not sure what year model it is of hand.

I also thought '66 was the last year for the venerable round CRT, ala my CTC-20 RCA New Vista.

Here's a photo of my C.M.

Rob

Here's the inside of my C.M.

Rob

Rob,

Is that C-M chassis identical to your CTC-20?

wvsaz,

No I don't think so. I think it more closely resembles the CTC-16 chassis, but I'd have to go look at them to see, and that is difficult just now where they are stored behind stu-uff.

Rob

Here is the inside of my CTC-20. I have filed photos. Definitely not a match.

This set is the one in which I delaminated a badly cataracted CRT and restored it. It is the set that made my avatar!

Rob

Who made Curtis-Mathes' chassis?
 

Here's the inside of my CTC-16A. The 16-E's I have are the same. None of these match the Curtis-Mathes.

I just looked in one book I have. Apparanetly C.M. used the same chassis that were also used by Emerson, Magnavox, Olympic and Philco. None match RCA. These must have been a special chassis made for these other manufacturers by RCA.

Rob

Curtis Mathes Chassis
 

Sure does look like the CTC-16.

Re: Curtis Mathes Chassis
 

Close but still no. The controls on the back apron especially. Look at my CTC-16A post again. More added info.

Rob

CM Sam's
 

A few weeks ago, I was looking through some loose Sam's I have. I came across one for a CM color set with a round CRT and noticed the year was 1967. I don't remember the month or the folder number. I have wondered how much of a time span went by between when a new set came out and then the Sam's for it. I am in New Jersey right now, so can't go back and look.

I probably have the Curtis Mathes knobs if you have a photograph or Sams number. I cleaned out a TV shop in Athens, Texas, near a now defunct Cutis Mathis factory. I have an never used Curtis Mathis chassis in my garage.

Jody

Re: CM Sam's
 

The Sams are ususally released about a year after the set is.