![]() |
Random Light Bulb inside Sylvania Superset?
1 Attachment(s)
A friend has found a 1983 model Sylvania Superset console television inside a basement and I'm trying to help him out with it. I had him take the back panel off for inspection before trying to plug it in, and inside, on the bottom of the case, he found an incandescent light bulb in a socket that is alligator clipped into the circuit somewhere. I have no idea what someone was doing here, but my gut feeling is either some sort of 'dim bulb' tester, or otherwise an improvised resistor for a kind of 'band-aid' fix. I have attached a photo of where the alligator leads are clipped on; this is all he has at the moment, but I will try to get some more. I tried to upload more images but can't resize to VK's liking from my phone. I have never encountered something like this inside a TV!
|
That is weird. Guess what I would do is trace down the start and end point of the connections in relation to what they're "supposed" to be doing or subbing for and go from there. It might be a "ballast" of sorts for a something they didn't know how to repair properly or possibly feeding a little more voltage to something they think is running low. Hard to say but either way it's going to need some detective work.
So from your username I take it you're a Yamaha motorcycle fan? 1981 SECA 750 on my end. |
Quote:
|
Seems to be at the AC input. I would guess for current control
( dim bulb) while trouble shooting. Zeno:smoke: |
Guess the next important question would be how large the light bulb was in the first place? A superset would take something on the order of 100 to 150 watts running and double that power-on surge, this might give a clue as to it's intended function.
As for Yamaha Natural Sound, I had a hand-me-down A-450 in high school and repaired a lot of the later Yamaha p2050, p2100 and p2200 pro amps over the years. There was an R-50 in the mix but it was stolen. I joined audiokarma in 2006 but was inactive during the split, it's been a few years. |
Could it be a "There I fixed it" replacement attempt for a thermistor at the power input?
|
Lol. What a "fix". My guess is a power resistor. If it is, now the real question is what caused it to fail?
There's probably a shorted cap or something fried ahead of it... |
If this is the chassis I think the FBT shorts, blows HOT & pass transistor.
The OEM parts net us near $100 USD. When done most of the CTR's were soft as a grape. But when new they gave an awesome pix for a few yrs. Zeno:smoke: |
I am unable to upload images because the site doesn't like them but the light bulb appears to be bridging a fuse socket labeled FS500, in the power supply...the main AC line fuse? This seems dangerous...times like these I wish the previous "technician" had left work notes behind!
|
Quote:
|
Quote:
|
Quote:
|
The light bulb is a 100-watt. Here is a photo of the alligator clips attached to the fuse terminals. EDIT: Required fuse is a 3.2 amp slo-blow type. I think the first course of action would be to see what happens if he puts the proper fuse in the holder.
https://imgur.com/a/zenith-tv-with-c...holder-q2HPvp5 |
Quote:
|
Quote:
|
| All times are GMT -5. The time now is 02:15 AM. |
Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.