Nexus VM-5 Modulator
 

Found this junk shopping. Locally made with F-type connections for composite and line level mono in and is apparently factory set to "Channel D"

https://i11.photobucket.com/albums/a...t/CGS_9350.jpg
https://i11.photobucket.com/albums/a...t/CGS_9351.jpg

There's sharpie on the side somehow relating D to the number 17, which according to this - ...implies this is a UHF RF modulator, but I can't find any more information on it. Is this a rebrand UHF modulator or something less interesting?

http://eaglecomtronics.com/Cable_Tel...ency_Chart.pdf

Analog cable channel D, also called channel 17; 138-144 MHz, not broadcast channel 17.

It took me a little while to find something to adapt the coaxial connectors to something else but yes, it IS a CATV modulator!
I put a test pattern on the input and tried a Jerrold cable box and the test pattern came in clean and strong on channel 17. :thmbsp:

Hi to all,

Hi MIPS, it's a nice unit and i think it's up to Broadcast quality with Vestigial sideband filtering not dual sideband like consumer units.
I purchased a new one circa 1990, it was on a VHF Band III channel, CCIR (Euro) channel norm. Used with an Avantek wideband power amplifier "brick", it made a decent low power 1 watt TV transmitter to use with your TVs around the house.

I would have loved a Blonder-Tongue modulator, the one with +95dBm output that you can find cheaply today as reformed cable equipment but BT only made Euro models on special order and they cost around 2K$ in 1990.

Best regards
jhalphen
Paris/France