![]() |
Early 70's Hitachi 13" Color
2 Attachment(s)
Here's an "odd" one.
I have a Hitachi CFA-440 13" Color set. It's solid state, uses a DOT MATRIX tube, and weighs a TON. I think it's from 1971-1972 Picture is pretty good. I don't leave it plugged in tho.. it has instant on with NO "vacation switch" Also odd for a 13"... it has a press board wodden cabinet. Anyone else have any Hitachi color sets of this vintage? |
Nice set!! A friend of mine have a 19'' model with two switch, one for vacation/normal and the other for stand-by. On the stand-by the set will mantain the filaments turned on, for this reason many of these sets have a weak CRT :(
|
I have one which is about the same size but a little older and I think somewhere I have a 19" around this age. It has been a while since I have had them in operation but I remember they would degauss when the power was shut off.
|
I have a matsushita made packard bell that looks almost exactly like that. I think it has 8 tubes in it. They are heavy and do work good.
|
I'll have to take the back off sometime, and see the picture tube number.
Just curious to what type they used. |
Quote:
|
Thanks Mark! Well,,, send uship it here for one of the consoles and I'll send it along. LOL!
|
Quote:
http://img163.imageshack.us/img163/1214/dsc04512f.jpg |
Quote:
That little set sure is KAWAII! |
I don't know exactly why, but I can hear a high-voltage rectifier tube screaming at me from within that set. :B
|
It certainly might have a tube rectifier in the high tension ckt.
Regretably, I passed on this exact model Hitachi a few yrs. back. It was over an hour drive upstate NY and cost 50 usd. Smashingly nice set.:) |
The set of my friend is all solid state, no HV rectifier.
|
This thread caused me to dream of finding a Japanese tube color set in an auto repair shop last night. Though one of my professors offering me a 23" monochrome set yesterday may have contributed to it. :)
|
Quote:
|
It is a tall order finding a working all tube color set especially in florida. My all tube 1964 Silvertone roundy needed a lot of work to revive, and still could benifit from some stuff that is too advanced for my current skill level. I also have a 1965 Philco roundy that don't use a single transistor (as long as you don't tune UHF), and a 1967 airline 1 transistor hybrid (2 transistors if tuneing UHF) that both worked good on original components after some adjustments.
I was going crazy too trying to get a vintage color set until I moved to Wi and started finding them. |
| All times are GMT -5. The time now is 01:44 PM. |
Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.