![]() |
Wanted ! 7DP4 B&W CRT
Hello Gentlemen,
An RCA 621TS TV i purchased at ETF 2011 was recently restored. In spite of all normal CRT electrode voltages and a healthy 7KV EHT, no raster. The ion trap magnets were photographed to memorize the original position then tweaked in all 4 quadrants: still not the slightest hint of brightness. I think the CRT is toast, will try to check with a Leader CRT tester/rejuvenator before giving up. I hope it has an adequate connector for this antique. In the meantime, i am initiating research on a working 7DP4 CRT. Rare or common? Recommended substitute? - with or without modifications? Anyone got an operational tube for sale? - PM please, including shipping cost from USA to Paris/france & payment method (PayPal ?) Thanks! in advance for any help, Best Regards jhalphen Paris/France |
Sorry, i don't have one, but I believe a 7TP4 will also work. It's the aluminized version of the 7DP4.
Good luck! |
PM sent.
|
Are you using the original Elctromagnetic Ion trap?
It's possible it's defective, you can try substituting a standard PM trap. It requires a double trap same as the 10BP4, the small magnet goes towards the front (or the small coil if it's an Electromagnet) There is a Military tube that is a perfect sub for the 7DP4, it's aluminized and requires no trap, it's also about an inch shorter and has a different focus voltage, although grounding the focus pin seems to work just fine. Fair Radio Sales was selling them but a collector bought them all up and was selling them to owners of 621's. Here's an article on them from the ETF. http://www.earlytelevision.org/7dp4_replacement.html Here's a link to the guy who has them, don't know if any are left. http://www.videokarma.org/showthread.php?t=248421 |
| All times are GMT -5. The time now is 11:54 AM. |
Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.