Videokarma.org TV - Video - Vintage Television & Radio Forums - Trouble with (CR70 Beam Builder)Sencor

Videokarma.org TV - Video - Vintage Television & Radio Forums (http://www.videokarma.org/index.php)

- Diagnostic & Test Equipment (http://www.videokarma.org/forumdisplay.php?f=177)

- - Trouble with (CR70 Beam Builder)Sencor (http://www.videokarma.org/showthread.php?t=252112)

chipper

09-10-2011 10:24 AM

Trouble with (CR70 Beam Builder)Sencor

All the tests seem to work ok EXCEPT for the emission testing. Even with a known good crt I get no reading at all on my meter. can some one walk me through the troubleshooting procedure for this problem?thanks:scratch2:

mstaton

09-10-2011 12:17 PM

The selector switch could be dirty or broken. You will have to take a look inside.

bandersen

09-10-2011 10:09 PM

Perhaps this calibration proccedure would help you track down the problem. http://antiqueradios.com/forums/view...18240#p1218240

chipper

09-12-2011 09:46 PM

Emission checks

OK: I will run these checks. I did follow the emission checks stated in my manual using k and g leads in series with a 100k resistor but got no reading . I also checked all power resistors and wiring harness leads and they were ok.

All times are GMT -5. The time now is 01:51 PM.