Videokarma.org TV - Video - Vintage Television & Radio Forums

Videokarma.org TV - Video - Vintage Television & Radio Forums (http://www.videokarma.org/index.php)
-   Early B&W and Projection TV (http://www.videokarma.org/forumdisplay.php?f=19)
-   -   Philco Predicta Television In Racine, Wisconsin (http://www.videokarma.org/showthread.php?t=250708)

Rental Limo 04-02-2011 10:04 AM

Philco Predicta Television In Racine, Wisconsin
 
http://milwaukee.craigslist.org/atq/2299138711.html

Price is kinda high though.

charokeeroad 04-02-2011 10:30 AM

Looks pretty, wonder if the CRT is good?

50scraze 04-02-2011 10:32 AM

Predictas are the most over priced sets. The cool space age look is really all its about.

charokeeroad 04-02-2011 10:45 AM

I tested the CRT on three Predictas out here in southern California over the last six months. All the CRTs were dead or close to it.

GeorgeJetson 04-02-2011 02:59 PM

That was one of the biggest problems with the Predictas.
almost all the 21" sets have bad picture tubes,the smaller 17" predictas seem to fare better.

dieseljeep 04-02-2011 06:17 PM

Quote:

Originally Posted by GeorgeJetson (Post 2999482)
That was one of the biggest problems with the Predictas.
almost all the 21" sets have bad picture tubes,the smaller 17" predictas seem to fare better.

That model doesn't interest me at all. The only predicta that interests me is the 17" table model with the power transformer. The CRT's are easier to get too. There's plenty of those lousy seventeener III's around with good CRT's.

DaveWM 04-02-2011 08:04 PM

I like my predicta a lot. its the 17" princess, red with white front and gold trim, with the trim CRT arms. I know a lot of people dont like them, but I found mine to be easy to work on. its very modular so you can pull the chassis and work on it. I did all the cap replacing without pulling the main pcb. There were a few that required bending my soldering gun tip, but for the most part is was no big deal. I don't think I would care for the holiday model as I prefer the transformer chassis as well.

marty59 04-02-2011 10:18 PM

My Sencore CR161 tester was very kind to my 21" barber pole CRT but you must use the lowest settings possible for these low filament voltage tubes and keep your fingers crossed! And I can understand, these sets may not be for everybody and especially to work on. I like it though.

Mine was given/saved for me quite a while back so it has a special value. Even though it now works, I still need to finish it up. The contrast pot is bad and I need to add an in-rush current limiter, make a new base for the cabinet, etc.

GeorgeJetson 04-05-2011 08:55 PM

I like all the Predicta models,but my favorites are the Stereo Tandem in blonde and the Danish Modern model.

My favorite of the 17" models would have to be the siesta model with built in clock.

One day I want to find a blonde stereo tandem.


All times are GMT -5. The time now is 11:31 AM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.