GE Television 810
 

Good Morning Guys - I Have a question about the television I am attempting to restore - A GE model 810 - To start with, The image on the screen is not the single image you'd expect but a triple image - and is also not to clear - If someone could suggest where to start looking for the problem - I can do so - while doing this ALSO the vertical went out - now I have just a line from left to right - got to address this problem first - I tryed replacing the 6V6 - when I did, the vertical went out, I replaced the 6V6 with the original tube but still no vertical - what could do this? Anyway - If anyone has a few suggestions I sure would appriciate them - These old sets are challenging but a lot of fun - Thanks Guys

Mr."G" 5/14/10

Three pictures from left to right means that the horizontal oscillator is going 3x as fast as it should be. Just a horizontal line across the screen means no vertical output. If you don't have a schematic it's in sams 53-12.