Videokarma.org TV - Video - Vintage Television & Radio Forums

Videokarma.org TV - Video - Vintage Television & Radio Forums (http://www.videokarma.org/index.php)
-   General Off Topic Forums (http://www.videokarma.org/forumdisplay.php?f=20)
-   -   OH GOD IT'S ON FIRE! AKA: Share horror stories about repairing antique electronics. (http://www.videokarma.org/showthread.php?t=246082)

MRX37 09-27-2009 08:19 PM

OH GOD IT'S ON FIRE! AKA: Share horror stories about repairing antique electronics.
 
Lots of people here restore and/or repair Antique TV's, radios, and apparently arcade cabinets as well. I remember one poster on here had a CRT go BOOM! while he was trying to remove a cataract.

Here's a couple stories of my own to get this thread started:

Tried to fix a rather old VCR once, and I accidentally spilled soda pop into it while it was plugged in and operating. The segnented LED display went crazy. Before it could do anything else, like possibly catch fire, I yanked the plug out of the wall and threw the thing away.

Found a console TV one time several years ago. I don't remember the brand. It was probably made in the early 80's. I had it in the garage, tweaking it, it had a nice picture. I was actually commenting on how good it was working when I heard a POP! The inside of the TV cabinet flashed a brilliant blue, and the TV no longer worked. This was before I joined AK I believe, so it went out to the curb.

Eric H 09-27-2009 09:01 PM

I've never had a single problem, everything I've worked on went smooth as silk with no problems whatsoever.:D

If you believe that I have a bridge to sell.

jpdylon 09-27-2009 10:25 PM

:lmao:

I had a fly go up in flames while i was working on a set once.

Had to change my pants after that.

bgadow 09-27-2009 10:40 PM

Here is one of many: 19 y.o., had a pile of repair shop rejects in the shed behind my mother's house. In the doorway was jambed a late model RCA console and on top was a late 70s JCPenney (RCA) 19" set. There was absolutely nothing wrong with the JCP; I took the back off out of curiousity. I was standing there and the wind came up and closed the door, knocking the JCP over. One strong RCA crt gone to air.

MRX37 09-28-2009 07:35 PM

I probably mentioned this on AK before, but:

I was trying to fix a 90's Zenith. It was a late 90's set, so the CRT wasn't completely shot yet. It was getting there, but enough tweaking would have made it sellable, and I really needed the money at the time, so I was willing to at least try and make it sellable.

This TV sat out in the rain before I found it. The dust had gotten wet, and clumps of it stuck to the chassis. I gave it several days to dry, then I spent hours cleaning off as much of that crap as I could. I replaced the nearly destroyed speakers with an identical pair from another junked 90's Zenith. I put it back together, plugged it in and fired it up.

After tweaking the G2 and customer controls, I had an okay picture... it wasn't great, but it was watchable. There was still some color bleeding even after tweaking, but I could have easily gotten $20.00 for it...

... Then during the test, suddenly there was a loud buzzing noise coming from inside the TV! The horizontal hold was completely lost, and the whole raster shrunk down to less then half of its original size. I unplugged it, and it went out to the garbage. I think even 5 seconds longer and I would have had a fire on my hands. It's made me hesitant to grab a TV that's been sitting in the rain.

Charlie 09-28-2009 09:19 PM

I installed an new electrolytic backwards once in a late-40's radio. Shortly after applying the mains, it went POW! (imagine brightly-colored P-O-W letters from an original Batman episode here)

Upon looking under the chassis, I found a mess that looked like a kitty cat exploded in there... kinda like in National Lampoon's Christmas Vacation!

The first time I plugged in my Sylvania Halolight, the power transformer burst into flames!

bgadow 09-28-2009 10:00 PM

I guess it was the second Christmas after I met my wife; she was living with her great aunt who had a lot of neat stuff around the house. Kim ended up buying a Motorola table top radio/phono that was in the garage, and giving it to me. Of course she wanted me to try it. I knew better but did it to please her. It played okay for a few minutes and then P-O-W! A black beauty had turned to confetti. So, I pulled the chassis and showed how smart I was. In the cabinet I found a NOS black beauty and installed it. Took about the same length of time, with the same results! Lots of confetti in those jokers!

One night I was sitting here at the computer and there was something I wanted to watch on TV, so I grabbed one of the Portacolors. I noticed the picture was getting dark, with a sorta smear in it. It was slowly getting worse and worse. Then, P-O-W! That El-men-co ceramic cased paper cap by the HO tube had blown apart. I'm surprised it didn't short something. Interesting thing is, once it blew, the set started working better again, just with a little defect in the picture.

Eric H 09-28-2009 10:50 PM

Probably my worst disaster was recapping an Emerson model 571 TV, this set uses 5 25Z6 tubes to rectify the low voltage.

Well I recapped it and powered it up, turns out I had a cap in backwards and it was getting hot, turned it around but it was too late, as soon as voltage got high enough it shorted out, instantly taking all five, brand new, JAN spec 25Z6 tubes with it!

I got the set basically working but never did finish it.

leadlike 09-29-2009 05:11 PM

Hmmm...I've been trying to think of a good electronic flame-out story, and I can't. Oh sure, I've made plenty of idiotic mistakes and destroyed some good equipment, but my stuff has never had the decency to give a good light show before its demise.

Now, my brother and I once came across our parent's Super 8mm home movie gear, which included a deadly bright "sun gun" home movie light for indoor filming. We played with it for a bit, and then set it aside directly on the carpet, while it was still lit. It took about twenty seconds for the thing to melt through to the plywood underlay. That was spectacular...

zenith2134 09-29-2009 05:58 PM

That reminds me, I once left a soldering iron on my rug while I was doing something else inside an amp or receiver (dont know which it was but it wasnt a tv set) and that was bad. Ruined a section of rug as well as the iron itself. I keep all soldering related stuff on a powerstrip w/ a little LED on indicator so I never run the risk of forgetting and torching the place.

I have had a set go on fire in my family, but not to me. This was before I was born even. But the story goes, that my grandfather fell asleep in front of their brand new tv (color, brand unknown, circa 1973-4) and my grandmother called down wondering why the hell he was making toast so late at night for.... and she came down to discover the set's back engulfed in flames. Must have been a hybrid.

Sandy G 09-29-2009 06:08 PM

Does Peeing on an Electric Fence when you were 5 or 6 count ? (grin)

zenith2134 09-29-2009 08:37 PM

In H.S. my teacher told us to never pee on the 3rd rail of the subway.... Learned from experience? Probably, if you've ever met this guy....hehe.

truetone36 10-06-2009 07:57 PM

This isn't exactly a repair disaster, but it is a mishap that led to to the need for repairs. I was moving some stuff in the mobile home I use for storage, and had to move an armoire across the room. As I scooted it along I unknowingly bumped the CRT neck of a late 60's G.E. color console (with the back missing) and suddenly heard the unmistakeable sound of the vacuum being let out. So now it looks like I've got to hunt for a CRT now. ouch!!!

radiotvnut 10-06-2009 10:50 PM

1. Back in the late '90's, Someone gave me a late '60's (probably a CTC31/38) RCA console. Someone gave it to the person that gave it to me and they didn't know anything about it. It was just a basic console with screw on legs. It was clean looking and I could tell that the CRT had been changed in recent years. It was dead and I soon discovered that the circuit breaker was defective. Like an idiot, I jumped the CB with a clip lead, turned the set on, and fire immediately started shooting out of the chassis from around the power supply area. I yanked the plug and let the fire die down. The whole area around the LV rectifier diodes was burnt to a crisp. I have an idea that lightning killed that set. Needless to say, I've never bypassed another circuit breaker.

2. Picked up a Panasonic built mid '80's 17" GE color TV off the curb. I soon found a bad power switch and installed another one. I was letting it play on the bench before putting it back together. All of a sudden; the picture pulled in on the sides and the horizontal lost sync. Before I could react - BOOM!!!SMOKE!!!STINK!!! The flyback transformer blew up, leaving a large crack around the case with little shards of windings hanging out. After replacing the flyback and HOT, all was well.

3. Around '97, someone gave me a nice 25" Zenith 4 tube hybrid color console. I fixed it and gave it to the church for their annual rummage sale. Some members of the church who had custody of their wild grandkids ended up with the set. It wasn't long before the grandson took a baseball bat to the face of the screen. I guess he got mad because he had to wait on the set to warm up, LOL! I ended up with the set (again) and was going to stick a used CRT that I had on hand back in there. While removing the broken CRT, I cut a big gash across my thumb and ended up having to go to the ER. I still have the scar to this day; but, the TV went to the dump.

MRX37 10-07-2009 05:59 AM

Quote:

Originally Posted by radiotvnut (Post 2956548)

3. Around '97, someone gave me a nice 25" Zenith 4 tube hybrid color console. I fixed it and gave it to the church for their annual rummage sale. Some members of the church who had custody of their wild grandkids ended up with the set. It wasn't long before the grandson took a baseball bat to the face of the screen. I guess he got mad because he had to wait on the set to warm up, LOL! I ended up with the set (again) and was going to stick a used CRT that I had on hand back in there. While removing the broken CRT, I cut a big gash across my thumb and ended up having to go to the ER. I still have the scar to this day; but, the TV went to the dump.

That little bastard... Someone should have taken a baseball bat to him...


All times are GMT -5. The time now is 04:01 PM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.