Magnavox U919 Horiz width?
 

Ok guys I have been noticing now I have dish network that the horiz width is stretched and on the left side of the raster the horiz pincushion is bowed as well. I have a sams but I am not seeing any adjustment for this. Im thinking yoke?

Thanks!

Have you adjusted the horiz efficiency? Maybe a problem in that circuit? Yokes catch a lot of blame but they rarely fail, and would give a more dramatic picture defect than what your seeing, I think.

I agree, I'd check all the voltages in that area first before suspecting the yoke. Yokes usually fail by burning the windings from arcing and make a carbon track and go catastrophically. I've seen some nasty burned ones.