Need to how to open the service menu on 2002 JVC
 

I have a 27" 2002 JVC model AV-27D303. I need to know how to get into the service menu to adjust the CRT cutoff and drive controls. I have the original remote for the set. I have a Sams for a '97 JVC; but, the procedure must be different because it didn't work on this one.

I got this set out of the "trash pile" at a local shop. There was originally no green which was caused by two open surface mount resistors on the neck board. After I got the green back, the picture still looked bad due to a very weak tube. The tube was the "bonded yoke" type similar to what's used in RCA sets.

I got a 2000 JVC (bad flyback and shorted HOT) from the same shop today with an excellent tube. This tube is the standard type with removeable yoke. That tube & yoke fit and workes well in the newer JVC; but, the grey scale is not quite what it should be. Any help in getting into the service menu will be appreciated.

There's no guarantee with these links because I'm not sure as to their age,but you could try it.

http://myweb.accessus.net/~090/how2adj.html#5.11

or

http://www.freelists.org/archives/te.../msg00092.html

Good luck

Thanks, that done the trick. The picture now looks fine.