Videokarma.org TV - Video - Vintage Television & Radio Forums

- Rectangular Screen Tube Televisions (http://www.videokarma.org/forumdisplay.php?f=45)

- - test jig (http://www.videokarma.org/showthread.php?t=11235)

Nice! I'll be bidding on it.

Is this what we'd been talking about for me to possibly make a picture on my CT100? :)

tim.. i am sure it could be wired to work somehow..but i wonder if the yoke on this jig is wound and tuned for solid state sets or tube..
I bet you could get a simular tube,... maybe smaller and wire the
guns to match the 15G's.even the focus voltages should work. then slip the ct-100's yoke over the neck and use wedges to align it..then you could somehow get it mounted inside the set..i would use a real old 15" CRT with a larger neck..
just my thought!!
also..I am not sure how much the raster would look .. maybe kinda zoomed in because of the deflection angle of the yoke in a 15G which i think is 90 degs..so if you find an old 15" rec set that is close to 90 degs it should be ok,and you would only be able to do convergence using magnets..
terry

Hmmmm......boy would I like to have it up and going by January 1!

You could send it to Harry Poster and have it converted :D

This jig looks like it is a fairly early one made for tube sets only. Some of the better ones have variable impedance on the yoke so that it can do all types of tube and solid state sets.

i have one like it.
it was meant for rca stuff only.since i have a more advanced one with all the adaptors this one faces the threat of having its tube pulled should a 19gwp22 be needed.i could always stuff a rejuve in it if i need to use it.