View Full Version : Wanted Sam's and Admiral knob


7"estatdef
08-29-2005, 10:29 AM
Hi,
My name is Terry and I'm new to the list. Live near Phila,Pa. Have been tinkering with old TV for a couple of years now. Some trash picked and others from that auction place.
I'm currently on the prowl for two Sam's folders #55-16 and 71-12. I suspect these are common ones as they are for the Motorola VT-71. I did pickup the manual from the Radioguy but I dosen't have the pin voltages or resistances for the TS-4J chasiss. Other than that It's wonderful! Good copies are fine don't need the original folder. Happy to pay coping and shipping costs.
I also am looking for a channel selector knob for a 1949 Admiral. It was used on many set like 17T1,19T11, 24X11, and 20X2.
Thankful for any help
Terry

Chad Hauris
08-29-2005, 12:07 PM
I should have those sams and can probably do a scan of the schematic and resistance chart in the next week or 2.

7"estatdef
08-29-2005, 02:00 PM
TNX Chad! I'll keep my eye out for it.
Terry

ekimetsok
08-29-2005, 02:54 PM
Terry: Come see me at the Kutztown Radio Meet in September. Bring a sample knob with you for comparison. I just might have what you need.

Mike Koste
Gobs of Knobs
Ambler, PA

7"estatdef
08-29-2005, 04:15 PM
Why go all the way to Kutztown? I'm in Roslyn. If you'd like to give me a call I'm at 215-572-0160
Terry

Chad Hauris
09-03-2005, 09:26 PM
The sams 55-16 scans are at:

http://www.retroaudiolab.com/sams

too tired to scan more tonight, time to go home...will scan other tomorrow.

7"estatdef
09-05-2005, 06:37 AM
Txn for the scans!!!!
Terry