I had sold one of these many years ago and always regretted it. I saw a chance to grab this one at a good price and jumped at it. It was a totally complete untouched attic find set that needed some TLC. I didn't completely refinish it, but lightly sanded and re-lacquered along with some detailing. My friend restored the chassis and it works very well with it's original Philco CRT. These usually have bad picture fade after about 20 minutes, but this one is very good. One of the last compact early 7" TV's.

decojoe67,
Looks real nice. I just finished a Sentinel 400-TV with a 7 inch crt. Your picture looks good too. I like your detailing of the tuner knob, did you repaint the numerals?
Ed

decojoe67,
Looks real nice. I just finished a Sentinel 400-TV with a 7 inch crt. Your picture looks good too. I like your detailing of the tuner knob, did you repaint the numerals?
Ed
Thanks Ed. The Sentinel TV is one of the best performing 7" models. The chassis is also found on period Airline and Crosley 7" models. The picture on my Philco is even better in person. It's tough to get a good screen shot. The tuner knob just needed some minor fleabites and wear touched up, and a cleaning, but basically it's as-found. It would've been very easy to spray it dark brown and fill the deeply cast numerals with ivory paint.
Enjoy your set!

That's definitely a very nice looking Philco. It''s one of the few Philco models that I wouldn't mind having an example of. :thmbsp:

That's definitely a very nice looking Philco. It''s one of the few Philco models that I wouldn't mind having an example of. :thmbsp:
Thanks. It reminds me of a pre-war TV attachment model. I particularly like the 2-level deep masking. The mask and tube are actually very slightly tilted upwards.

That's a nice set.

IIRC those used brute Force 60Hz transformer derived HV. Be careful working on it if you ever have it open.

That's a nice set.

IIRC those used brute Force 60Hz transformer derived HV. Be careful working on it if you ever have it open.
Thank you for that advice. My repairman didn't comment on that, but he's worked on everything and anything that had vacuum tubes in it! You'd had to see the bag of old components he had from this set. You wouldn't think all that would even fit inside the chassis!

Doesn’t it use a 6V6 oscillator supply, like the bakelite version? :scratch2:

http://www.myvintagetv.com/philco_hv.htm

jr

Thank you for that advice. My repairman didn't comment on that, but he's worked on everything and anything that had vacuum tubes in it! You'd had to see the bag of old components he had from this set. You wouldn't think all that would even fit inside the chassis!

Philco was cap happy into the mid 50s I bet their cap vendor LOVED them.

I could be wrong about the HV supply the only pre-split-chassis Philco I've owned is my 48-1000 so I'm going off (miss-?)remembered forum posts.

Philco was cap happy into the mid 50s I bet their cap vendor LOVED them.

I could be wrong about the HV supply the only pre-split-chassis Philco I've owned is my 48-1000 so I'm going off (miss-?)remembered forum posts.

Yes, I'm 99% sure this is not a brute force set. Possibly the earlier 7" model, the 48-700, is brute force.

Yes, I'm 99% sure this is not a brute force set. Possibly the earlier 7" model, the 48-700, is brute force.

Indeed, I just checked the schematic for a 48-700... about 3500 V, transformer supplied into a .5mfd cap... YIKES! :eek:
Could really ruin your day.

jr

Indeed, I just checked the schematic for a 48-700... about 3500 V, transformer supplied into a .5mfd cap... YIKES! :eek:
Could really ruin your day.

jr
Thanks for verifying that. I actually never warmed-up to the 48-700 model with it's German "Grundig-Majestic" styling. It's a heavy beast and uses the 7GP4 CRT rather than the common 7JP4 too.