Hello,

I picked up a used Toshiba 27af44 from craigslist and I noticed that it has this "jitter" interference on the screen. It happens on all inputs and I tried an SNES and a PS2 and they both showed the same type of jitter. What could be the cause of this? Here are a few videos of the problem. It was kinda hard to capture with my phone camera but hopefully it will give you some idea of what the issue is.
thanks.

https://drive.google.com/open?id=1RtcCmQstrcBMoG-zkjVngN1PzEyVjYKa

https://drive.google.com/open?id=1s_6IsjwDYimBcBtvPriGyV8cC3AFByWv

Most likely the power supply isnt regulating its pretty subtle
so wont be easy to find. A photo of the back or the chassis
would help as Toshiba went from building there own to having
Orion A.K.A. Emerson build them. Also if it has a chassis number
post that, format is TAC-####
Good Luck

73 Zeno:smoke:
LFOD !

That model has a number of small capacitors in the power supply. I've seen a lot of strange problems when one or more open.

Here is a picture of the back:
https://i.imgur.com/Sffwt1Vl.jpg

I had a feeling it might be capacitor related. Do you guys thinking recapping will fix it? I'd like to keep this TV, it'd be great for my retrogaming setup. Other than a slight tilt, it has the best geometry I've seen from a consumer level flat CRT, and I've had a few in my time...

Most likely the power supply isnt regulating its pretty subtle
so wont be easy to find. A photo of the back or the chassis
would help as Toshiba went from building there own to having
Orion A.K.A. Emerson build them. Also if it has a chassis number
post that, format is TAC-####
Good Luck

73 Zeno:smoke:
LFOD !
I have an Emerson that was made by Funai, a 20" around the same age.
I have an older Toshiba 19" table model ca 1990, assembled in USA that has an RCA CRT and a Gold Star chassis. :scratch2: