View Full Version : GE 1VCR5018X 4head Hi-Fi VCR


jmm83
11-02-2015, 12:57 AM
Just Got this VCR Yesterday for $10

it did not work at first
it would load the tape & come back out
the Switches on the Loading Mechanism were broken
had to take ones out of a broken 80's magnavox (panasonic) vcr

this vcr only has one belt and that is on the loading motor

Does Any one know what the PAY TV Knob does on the back?

And please let me know if you know anything else about it
thanks

rca2000
11-02-2015, 01:33 AM
SOMEWHERE....I have one a lot like it, labelled Magnavox. early 1985 model. I bought it new--on a close-out at a target store in I think October 1985. IIRC, I paid $349 for it. At the TIME...that was a GOOD deal--for a hi-fi vcr. I got OVER 15 YEARS of use out of it...a LOT of use...before the SMPS finally gave up in summer of 2002. I meant to fix it, but it is STILL around here somewhere. IIRC, I put new rubber in it after about 10 years including a pinch roller. The heads NEVER went bad, nor any motors...


It has been awhile since i saw it.....but i THINK...mine TOO...had that switch on the rear.

Ed in Tx
11-02-2015, 08:15 AM
Equivalent to the Panasonic PV-1730. I almost bought one back in the day, but it was ahead of the MTS stereo standard so it lacks a stereo TV tuner. This has direct drive reel motors which is why it lacks most of the usual belts & idlers.
That Pay TV switch has to do with the old subscription boxes they had back in the early-mid-80s like On TV. You would set it up to the channel the descrambler box put out so the VCR would switch to it. Something like that...:D

Dude111
11-02-2015, 09:28 AM
Does Any one know what the PAY TV Knob does on the back?I wonder if it has a descrambler in it?? (For pay TV)

Would be interesting!! (Although there isnt anymore analog scrambled channels anymore)

Ed in Tx
11-02-2015, 09:41 AM
No the descrambler would be a separate box supplied by the pay TV service. You would set the VCR switch to the channel the Pay TV box put out. "On TV" was on Ch 21 here back in the late '70s until mid-80s when cable took over and those OTA Pay TV services went away.

dishdude
11-02-2015, 09:46 AM
The PAY TV switch worked with an adapter that plugged into the AUX port. If you needed a cable box to descramble HBO, it allowed you to split your cable line to the VCR and cable box, then run the output of the cable box to the adapter. This allowed you to tune a scrambled channel on the VCR tuner so you could set timers on multiple channels.

Ed in Tx
11-02-2015, 09:57 AM
The PAY TV switch worked with an adapter that plugged into the AUX port. If you needed a cable box to descramble HBO, it allowed you to split your cable line to the VCR and cable box, then run the output of the cable box to the adapter. This allowed you to tune a scrambled channel on the VCR tuner so you could set timers on multiple channels.

Ah yes it comes back now. It has that AUX jack in the back .... never saw a descrambler for that. Another obsolete technology.

jmm83
11-02-2015, 02:43 PM
oh ok thanks for all the info
does anyone know what remote went with it?

centralradio
11-03-2015, 11:13 PM
Nice VCR.My tuner for my portable Panasonic has the pay channel knob.We had HBO with its cable box direct fed into the VCR so I never used the back selector.The Panasonic PV-1730 was my first choice then I decided I wanted a portable PV9600 with its tuner.

Might be lucky to find a match on Google and Ebay for a remote.

jmm83
11-04-2015, 10:03 PM
vcr has been acting up it was playing slow at first with some static
but if i rewind and fast forward a few times it will play normally
does anyone know what the problem is

Ed in Tx
11-05-2015, 07:28 AM
Loaded with 30 year old electrolytic capacitors plus wear on the cylinder and pinch roller, and everything else, lots to check.

That particular chassis used a cylinder that would wear out, bottom of cylinder where the tape exits would get worn slick causing tape drag ("stiction"). Also the cylinder bearings would wear causing excess wobble in the upper cylinder as is spins.

jmm83
11-15-2015, 08:44 PM
I think it might be the Capstan Motor
It Spins Slow at first
is there any way to put a different one in it?

Ed in Tx
11-15-2015, 09:07 PM
You cannot substitute it with a different motor if that's what you mean. Might be able to use one from a PV8000, 9000, 1730 for sure. I doubt it's the capstan motor though. Just a bad DD capstan motor would be more rare than one of those VCRs actually working properly after 30 years. Electrolytic capacitors are the bane of electronic devices. I suspect there are more than a few bad in your VCR.

centralradio
11-15-2015, 10:29 PM
I agree with Ed.Video capstan motors are more complex .They are not like cassette tape motors with a trimmer inside or tape speed adjustments and some which are interchangeable.

Yes check the caps around the motor driver circuit plus the power supply circuit going to the motor.

pac.attack76
11-16-2015, 02:53 PM
Nice machine. Had one just like it back in the 90's.:thmbsp:

slatton86
11-30-2015, 07:57 PM
DishDude nailed the Pay TV knob, I read it in the manual long ago.

Man those crazy RF chains full of splitters and switches we used to wrig up could be nuts.

I used a VCR similar to this when I was a kid and with it I discovered that (at least for my CATV near Memphis TN)
I could run my cable box to the VCR with RF
and the VCR to another via composite video(probably could have skipped this with a better tv),
tune the box to HBO,
cut the composite video cable,
switch the polarity,
and I had HBO!
we had only 3 premium channels HBO, Cinemax and Disney and we didn't pay for any. The only reason for the box was my 70's model Quasar.

Dude111
11-30-2015, 09:49 PM
I remember on my black and white TV I had a "FINE TUNE" slider and I could "fine tune" a scrambled picure in enough to watch it :)


Ah man!!

svhs
02-11-2019, 12:48 PM
Ah yes it comes back now. It has that AUX jack in the back .... never saw a descrambler for that. Another obsolete technology.
It's DATA jack fit to that AUX jack:scratch2: to Scientific Atlanta Digital cable Set top box Explorer 2100 tv decoder
http://www.zeppy.io/img/loader.GIFhttps://www.picclickimg.com/00/s/MTIwMFgxNjAw/z/AkcAAOSwIz5cW4O-/$_3.JPGhttps://www.ebay.com/itm/352588178603

fun
https://youtu.be/tnY7UVyaFiQ?t=37

humm
l don't find nothing here http://theoldcatvequipmentmuseum.org/170/173/1731/

svhs
02-12-2019, 02:08 PM
Equivalent to the Panasonic PV-1730. I almost bought one back in the day, but it was ahead of the MTS stereo standard so it lacks a stereo TV tuner. This has direct drive reel motors which is why it lacks most of the usual belts & idlers.
That Pay TV switch has to do with the old subscription boxes they had back in the early-mid-80s like On TV. You would set it up to the channel the descrambler box put out so the VCR would switch to it. Something like that...:D
EXACTLY :thmbsp::thmbsp:http://www.videokarma.org/attachment.php?attachmentid=202108&stc=1&d=1610050016https://srv2.umlib.com/d86d6023d8c9e9b93b5d77921b1f00a1/252_1314744952-217101521_manual.pdf-4.png
The PAY TV switch worked with an adapter that plugged into the AUX port. If you needed a cable box to descramble HBO, it allowed you to split your cable line to the VCR and cable box, then run the output of the cable box to the adapter. This allowed you to tune a scrambled channel on the VCR tuner so you could set timers on multiple channels.
The AUX port Is For Sound multiplex adapter:thmbsp:
HERE EXAMPLE For National Panasonic TU-802(M) TV Sound Multiplex Adaptor
Just LOOK THIS DIN CONNECTOR - It-Fits EXACTLY to the DIN aux female port on EVERY MTS READY TV/VCR,that not have bluit mtsHitachi VTMTS2 MTS stereo Adaptor for older model Hitachi TV"s and VCR"s with stereo Adaptor jacks. Some VCR"s that are compatible are VT-65A--VT76AY--VT-89A--VT-86A--and VT-87A. Complete with Adaptor type F cable DIN cable and stereo RCA cable.
https://auctions.c.yimg.jp/images.auctions.yahoo.co.jp/image/dr514/auc0209/users/5/0/1/9/m_tec_7001-imgbatch_1426579247/600x353-2015031700010.jpghttp://vintageelectronics.betamaxcollectors.com/images/panasonicomnivisionvhsvcrmodelpv-1730_7.jpghttps://auctions.c.yimg.jp/images.auctions.yahoo.co.jp/image/dr514/auc0209/users/5/0/1/9/m_tec_7001-imgbatch_1426579247/600x243-2015031700009.jpg

HERE another Panasonic Quasar Portable VHS Video Cassette Recorder and Quasar tuner with DIN aux female port ,BUT without PAY TV switch:yes:

https://www.picclickimg.com/00/s/OTAwWDE2MDA=/z/krUAAOSwS2lcRBvd/$/Quasar-Portable-VHS-Video-Cassette-Recorder-and-Quasar-_57.jpghttps://www.picclickimg.com/d/w1600/pict/132925524261_/Quasar-Portable-VHS-Video-Cassette-Recorder-and-Quasar.jpg

svhs
02-17-2019, 10:28 AM
CABLE ADAPTER JACK Connection for external antenna switcher:banana::banana::banana::banana:https://www.w2ihy.com/media/wysiwyg/3x4CoaxSwtichPlus/1x4_coax_connectors.jpghttps://www.w2ihy.com/media/catalog/product/cache/1/image/265x/9df78eab33525d08d6e5fb8d27136e95/1/_/1_x_4_coax_switch_front.jpghttps://www.w2ihy.com/media/wysiwyg/1x4_Coax_Switch_Configuration.jpghttps://www.w2ihy.com/media/wysiwyg/3x4CoaxSwtichPlus/1x4_din.jpgCONTROL CONNECTOR

This 5 Pin DIN switches the coax input of the 1 X 4 Switch to one of the 4 coax outputs. The 1 X 4 Antenna Switch Control Connector may be connected to the 3 X 1 Controller / Switch 1 X4 Select 5 pin DIN output. Below is a picture that defines the function of the pins on the 5 PIN DIN.https://www.w2ihy.com/1-x-4-coax-switch.htmlThe 1 X 4 Coax Switch is designed to be used with the W2IHY 3 X 1 Controller. When the 1 X 4 Coax Switch is attached to the W2IHY 3 X 1 Controller the connectivity of the controller is significantly expanded. The 1 X 4 Coax Switch is built with a Rugged steel case and when used with the W2IHY 3 X 1 Controller


connects any one of 3 radios to any one of 3 amplifiers and/or up to 4 antennas

Capable of easily handling 10,000 watts PEP of RF.

Wall or desk mountable

Dimensions 6 ½ I” W x 1-5/8” H x 2 5/8” deephttps://www.w2ihy.com/media/wysiwyg/3x4CoaxSwtichPlus/1x4_leds.jpghttps://i.ebayimg.com/images/g/YMcAAOSwX9FZIblX/s-l1600.jpg

waltchan
05-21-2019, 12:09 AM
This same mechanism chassis was also found in Panasonic AG-1950 industrial VCR.

svhs
01-07-2021, 11:30 AM
FINALLY :banana:https://scontent.fsof3-1.fna.fbcdn.net/v/t31.0-8/21587306_10155794234688982_5864374625836404047_o.j pg?_nc_cat=110&ccb=2&_nc_sid=cdbe9c&_nc_ohc=IMWANM5SBUcAX_CaYT9&_nc_ht=scontent.fsof3-1.fna&oh=cd72a67106556d0d7f84854fedd630e0&oe=601C3BA6https://scontent.fsof3-1.fna.fbcdn.net/v/t31.0-8/21551738_10155794106753982_4460727408843903092_o.j pg?_nc_cat=106&ccb=2&_nc_sid=cdbe9c&_nc_ohc=TTNRDOchY5EAX8UEVv8&_nc_ht=scontent.fsof3-1.fna&oh=bf12c4aa3b0e6850d298c6051727e992&oe=601BCFC5https://www.picclickimg.com/d/w1600/pict/114298822912_/RCA-CAD030-Cable-TV-Adapter-VCR-Games-Cable.jpghttps://www.picclickimg.com/00/s/NTk1WDExMDY=/z/xLEAAOSwKG1fCc9-/$/RCA-CAD030-Cable-TV-Adapter-VCR-Games-Cable-_57.jpghttps://www.picclickimg.com/00/s/MTA0Mlg4MTk=/z/VzoAAOSwMUVfCc~N/$/RCA-CAD030-Cable-TV-Adapter-VCR-Games-Cable-_57.jpghttps://www.picclickimg.com/00/s/MTAzN1g5MDY=/z/Ef8AAOSwR0dfCdAM/$/RCA-CAD030-Cable-TV-Adapter-VCR-Games-Cable-_57.jpg

svhs
01-07-2021, 01:57 PM
https://i.ebayimg.com/images/g/d4MAAOSwIrVbS5OB/s-l300.jpghttps://auctions.c.yimg.jp/images.auctions.yahoo.co.jp/image/dr187/auc0303/users/0/4/5/3/rnc1omocha-img600x450-1453356178vaw5x014811.jpghttp://www.videokarma.org/attachment.php?attachmentid=188663&d=1446447370https://www.canuckaudiomart.com/details/649633838-yamaha-rs-kw5-wireless-remote-amp-receiver-nos-mint-w-ultra-rare-6-pin-cable/images/2774154/Yamaha RS-KW5 Wireless Remote & Receiverhttps://img.canuckaudiomart.com/uploads/large/2774147-6667fdc2-yamaha-rs-kw5-wireless-remote-amp-receiver-nos-mint-w-ultra-rare-6-pin-cable.jpghttps://i.ebayimg.com/images/g/QAsAAOSw31JfX8IA/s-l1600.jpghttps://bluess.cocolog-nifty.com/.shared/image.html?/photos/uncategorized/2017/07/30/yamaha_tx90008.jpghttps://reverb.com/item/15506824-jvc-fx-33-fm-am-computer-controlled-stereo-tunerhttps://reverb.com/item/15506824-jvc-fx-33-fm-am-computer-controlled-stereo-tunerhttps://images.reverb.com/image/upload/s--8zycS_Vu--/f_auto,t_supersize/v1538412358/pvoinh0ojqair5b3sjki.jpghttps://images.reverb.com/image/upload/s--Ra6JKaWx--/f_auto,t_supersize/v1538412354/whpmmxutwsla0g37rda1.jpghttp://www.videokarma.org/attachment.php?attachmentid=202272&stc=1&d=1612808981https://auctions.c.yimg.jp/images.auctions.yahoo.co.jp/image/dr000/auc0107/users/3de0ab95ba018a5ad294a408c427a03086a301a5/i-img1200x900-1595827550sfzcg27985.jpgVICTOR T-X900https://auctions.c.yimg.jp/images.auctions.yahoo.co.jp/image/dr000/auc0107/users/3de0ab95ba018a5ad294a408c427a03086a301a5/i-img1200x900-15958275491qvkqq7985.jpghttps://auctions.c.yimg.jp/images.auctions.yahoo.co.jp/image/dr000/auc0202/users/c28b391d10b469c8340412b7938e3919c0cc41af/i-img768x576-1613277033qsgs3a78492.jpgThe biggest feature of the TX900 is that it actively introduces computer control and sets the optimum reception mode according to the reception status.
It was that we had completed and installed a system that could automatically set the motion and even control the antenna. This automatic control
Memory set function such as sensitivity, IF band, stereo QSC (Quiting Slope Control) for each receiving station
It was equipped with two antennas, A and B, and a memory for the direction. In particular, in addition to the automatic antenna switching function of the two systems,
When the specified antenna rotator (Emoto Antenna Co., Ltd. Emotator 202VF) is connected, the tuner ante
Remote control is possible with the Na Adjust key, and you can adjust and make notes by looking at the accurate electric field strength display of the tuner.
By releasing, the antenna direction is automatically directed to the direction once set by the receiving station.https://auctions.c.yimg.jp/images.auctions.yahoo.co.jp/image/dr000/auc0202/users/c28b391d10b469c8340412b7938e3919c0cc41af/i-img768x576-1613277092fazrpw136707.jpghttps://auctions.c.yimg.jp/images.auctions.yahoo.co.jp/image/dr000/auc0202/users/c28b391d10b469c8340412b7938e3919c0cc41af/i-img768x576-1613277099kdm7ng629.jpg

svhs
02-20-2021, 11:47 PM
https://i.ebayimg.com/images/g/yN0AAOSwo8pfARSz/s-l1600.jpghttps://i.ebayimg.com/images/g/esIAAOSw~SNfARTD/s-l1600.jpghttps://www.head-fi.org/threads/heard-of-the-jvc-rx-1010vtn-receiver-anyone.172576/Channel Plus DA-550BID https://i.ebayimg.com/images/g/a2gAAOSw0d1cCukG/s-l1600.jpghttps://www.qsl.net/yo3dan/fc20:thmbsp::yes: