Can anyone I.D. this 60's era roundie? Except for the large controls at the top doesn't look like an RCA or clone. Don't think Zenith had that knob layout.

-Steve D.

It looks to be a Philco.. Notice the knob layout is virtually the same..

http://www.videokarma.org/attachment.php?attachmentid=179217&d=1372919675

It looks to be a Philco.. Notice the knob layout is virtually the same..

http://www.videokarma.org/attachment.php?attachmentid=179217&d=1372919675

The knob layout is very similar. The mask color is a bit different. But this as is close to the photo I attached to any I've seen.

Thanks,
-Steve D.

Philco I'd say, nice looking set!

Likely a 1965, with chassis 15M90, a CTC15 clone

Definitely 1965, chassis 15M90, your CTC-15 clone chassis in short. DavGoodlin is right. Philco before they began doing more of their own thing on Roundie chassis.

Philco, as mentioned, used an RCA CTC-15 chassis and employed their own tuner design. That tuner knob configuration is what threw me.
Thanks for the replies.

-Steve D.