Chip Chester
10-17-2014, 05:42 PM
Scanning CL for "whatever jumps out at me"... Saw this ad over a week ago, but never reviewed the pictures until this morning. Picture #8 caught my eye.
http://columbus.craigslist.org/atq/4698355738.html
By late this afternoon, the hardware-store-dirty but complete and unmolested 1959 Princess (or Debutante?) was in my house, waiting for a sponge bath. They said it worked when they stopped using it. Wonder how long ago that was... It will sit untested until well into winter, when I have time to read up a little bit.
Chip
(The year and model determination came from here: http://www.electronichouse.com/slideshow/category/2212/424 )
DaveWM
10-17-2014, 06:06 PM
Nice score. Don't forget they have a low voltage CRT filament if you get the CRT tester on it.
Bill R
10-17-2014, 06:19 PM
looks like a capacitor tester in photo 6
Eric H
10-17-2014, 06:26 PM
Cool find!
Hope you grabbed that metal can of Brasso next to it, the new stuff in plastic is no good.
Chip Chester
10-17-2014, 06:34 PM
Brasso was gone -- or at least, not in that spot any more. Have a few old cans still around from various garage/shop cleanouts, so I'm good for awhile.
Flitz is a pretty good polish -- as is Simichrome.
I looked at the test gear too, but all the functions/ranges I've already got covered on other gear. Gear I don't have to fix before using. I'm trying to limit projects, but a Predicta has always been high on the list, even if it is an entry-level one.
I didn't remember reading anywhere that they weigh a ton. Especially on top of a ladder.
Chip
Eric H
10-17-2014, 06:46 PM
I didn't remember reading anywhere that they weigh a ton. Especially on top of a ladder.
Chip
Yeah, and it's all on the top too, very unwieldy.
the 17" models have a power transformer so they probably weigh as much as the 21" Holiday which doesn't.
Boobtubeman
10-17-2014, 07:08 PM
Anyone grab the radio?
SR
Chip Chester
10-17-2014, 09:16 PM
The tombstone to the right of the TV? It wasn't an actual radio. No guts, controls, or cords. Might have been an external speaker, but it had a couple 1/8" jacks grafted to the front, right at the peak. They were attached to a bit of aluminum angle, and screwed to the face of the case with drywall screws. Wires went inside thru two other holes in the face.
Remember, it's a hardware store.
I'm not sure it was authentically old... but still.
Chip
josephdaniel
10-18-2014, 01:28 AM
I can only dream of finding a place like this... I see a small sony (?) set in picture 4
WISCOJIM
10-18-2014, 06:35 PM
1920's Peerless cathedral speaker
http://wd4eui.com/Peerless_Speaker.html
.
Chip Chester
10-18-2014, 10:38 PM
That's probably it. And it's likely still there...
Not in as good a shape as the referenced speaker, though.
Chip