are these screws for a swivel base?
this is a 1959 zenith 16e21
there are only 4 on each on one side
i am not talking about the legs but the metal scres in the center

Not sure of the answer to your question, but I do want to throw out that if you need any parts I am forced to scrap (no buyers in the area) a 58 or 59 Space Command 24". Everything is squeaky clean.

Not sure of the answer to your question, but I do want to throw out that if you need any parts I am forced to scrap (no buyers in the area) a 58 or 59 Space Command 24". Everything is squeaky clean.

is the afc diode good? :thmbsp:
does it work
does it have a swivel base or just a chaissis?

are these screws for a swivel base?
this is a 1959 zenith 16e21
there are only 4 on each on one side
i am not talking about the legs but the metal scres in the center
Those are the shipping locations for the legs. They were less prone to damage, when shipped without the legs in place. :yes:

is the afc diode good? :thmbsp:
does it work
does it have a swivel base or just a chaissis?

Mine is a 24" floor model; no swivel base. I got stumped on it a few years ago and lost interest. Figured a pretty early remote set with a large (for the time) screen would strike up some interest, but nobody seems to be looking for that type of thing so I am going to part out the main and remote chassis and tuner (with motor), and scrap the crt and cabinet.

Mine is a 24" floor model; no swivel base. I got stumped on it a few years ago and lost interest. Figured a pretty early remote set with a large (for the time) screen would strike up some interest, but nobody seems to be looking for that type of thing so I am going to part out the main and remote chassis and tuner (with motor), and scrap the crt and cabinet.

I'm probably picking up a 1956 Royal X chassis Zenith this weekend, also a 24-incher. Might be interested in the remote guts if you're willing to part with 'em. Also, what is the Chassis# ? CRT type? Emission any good? :scratch2:

The main chassis is 18C24Q. Not sure what the remote chassis # is, but I have removed everything except the crt for part out. As far as condition goes, everything is remarkably clean. I really hated parting this one as it seemed to have little use with a nearly full population of stock Zenith tubes and very little dirt, even inside the HV cage. Send me a PM if you want to work something out on any of this. Thanks!

I went ahead and removed the like new CRT. It is the 24" from that year and the number on the socket is hard to read. I think it says 24UP4 or 24JP4. Anyone who needs one and can pick it up can have it.