Hi I have a Panasonic AG 1970
Problem is that i took the board out of the vcr & unhooked the some of the wires to put some new caps on the board & now when i turn on the vcr it will not load a tape & the head spins.
I have a working ag 1970 & i looked at where the wires go & everything seems to be right. so now i dont know what to do

Hi I have a Panasonic AG 1970
Problem is that i took the board out of the vcr & unhooked the some of the wires to put some new caps on the board & now when i turn on the vcr it will not load a tape & the head spins.
I have a working ag 1970 & i looked at where the wires go & everything seems to be right. so now i dont know what to do
Sounds like some wires were inserted in the wrong place. Re-check again...

tried that & still the same thing

wires are in the right place

today i tried unhooking the wires from a junk AG1970 with bad head & same problem happend i dont know why they do that there must be something you have to do reprogram or reset it somehow.
i will never unhook the wires from my good one or any panasonic vcr ever again

& does anyone have the service manual for this vcr

today i tried unhooking the wires from a junk AG1970 with bad head & same problem happend i dont know why they do that there must be something you have to do reprogram or reset it somehow.
i will never unhook the wires from my good one or any panasonic vcr ever again

& does anyone have the service manual for this vcr
You can try using this ask-a-tech VCR page and describe your problem for each VCR problem you have, and he will reply back to you in a timely manner.

Go to studiosoundelectronics.com, and click the ask-a-tech link at the left side (third).

It's possible that the regulator in power supply failed, causing video head to spin with no tape inside. You probably have to trash it. Remember, Panasonic is PanaScam sometimes, due to its cheap-looking construction and cheap materials Panasonic used.

oh i did that today he said it could be the caps but it dont really make sense because i tried un hooking the wires from another ag 1970 that i dont really care about & the same thing happpens when it's hooked back up head spinswhen powered on then stops & power light goes out

i guess they are parts vcrs for now

is this vcr good
JVC S-VHS HR-S7000U
guy wants $65 for it shiped

is this vcr good
JVC S-VHS HR-S7000U
guy wants $65 for it shiped
Please consult this list I wrote at:

http://www.videokarma.org/showthread.php?t=255494

ok it's # 6 on the list
but is $65 a good price for it

also there is a Canon VR-HF720A for $70
that is # 1 on the list

It may be worth finding a service manual...

Chip

also there is a Canon VR-HF720A for $70
that is # 1 on the list
Go get this one. It's my most favorite VCR of all time, and picture quality is really exceptional. You won't regret it. I have the Panasonic-version of it, NV-H70PX, which is the identical twin to Canon VR-HF720A.