View Full Version : who made this radio chassis?


jbivy
03-26-2012, 05:57 PM
I picked this up a few years back on epay, partially recapped it, it worked fair. Works pretty good now after i restuffed the paper can and replaced a tube socket. Yes theres a zenith front panel off to the side that came with it, but it doesnt come close to fitting the knobs. The knobs on it are from an old sonora i had. So..what is this?
http://img9.imageshack.us/img9/5269/cars133.jpg (http://imageshack.us/photo/my-images/9/cars133.jpg/)

dieseljeep
03-26-2012, 06:31 PM
There was so many chassis of that type. The was the tubes and IF transformers were mounted, it is out of a radio phono table combo. When replying, include some of the part numbers of the major components, ie, the IF transformers, speaker, output transformer, tuning condenser. It could be a Warwick built, Silvertone.

jbivy
03-26-2012, 06:43 PM
Well the speaker says its part # 49cz602, then below that 343823, the transformer says 843819, well the one paper can says zenith on it but..its part22-1707ao. Beyond that, i think the previous owner did a good job sanding and steel wooling this thing to have near no numbers on it.

Perhaps it could have been a zenith and the front plate went to the missing record player section?

Ive just been bored and tinkered with this a bit.

Dave A
03-26-2012, 06:44 PM
Given the rear direction of the tubes I am thinking some kind of economy chairside radio. Dial facing up, tubes down for service. Just a guess.

dieseljeep
03-26-2012, 07:08 PM
Well the speaker says its part # 49cz602, then below that 343823, the transformer says 843819, well the one paper can says zenith on it but..its part22-1707ao. Beyond that, i think the previous owner did a good job sanding and steel wooling this thing to have near no numbers on it.

Perhaps it could have been a zenith and the front plate went to the missing record player section?

Ive just been bored and tinkered with this a bit.
It definately is a Zenith chassis from a table model combo. It was built in the early part of 1948. The speaker is a genuine Zenith-made speaker. I'll look at Riders 17-19 and see if there is a chassis that looks simular.

dieseljeep
03-26-2012, 07:19 PM
Zenith model 6R886. Chassis 6E02. Information found in Riders Vol. 17. Zenith pages 16&17. An interesting design.

jbivy
03-27-2012, 12:32 AM
Thanks a ton, i was wondering what this old girl was.