rcafan
09-29-2010, 08:41 PM
Has anybody got a varister for my CTC9, 70 ohm cold and 0.5 ohm
hot or a idea for replacing. (its R193 in the 117V input.
Thanks
hot or a idea for replacing. (its R193 in the 117V input.
Thanks
|
View Full Version : Varister wanted rcafan 09-29-2010, 08:41 PM Has anybody got a varister for my CTC9, 70 ohm cold and 0.5 ohm hot or a idea for replacing. (its R193 in the 117V input. Thanks Findm-Keepm 09-29-2010, 10:32 PM My Workman guide (sorry no date) says it's replaced by a Workman FR.49, a .49 ohm hot thermistor. No data in the guide, just the "hot" resistance. Oneida and GC also marketed a line of thermistors, perhaps someone has one hiding somewhere. Else, you may be able to find a GE Sensing Systems thermistor to work - Mouser sells these. A CL-80 comes close (47 ohms cold, .5 ohms at 100% rated current of 3A) Or try and find the original RCA... Cheers, oldtvman 09-30-2010, 06:49 AM those are on sale on ebay under electronic parts rcafan 09-30-2010, 04:00 PM Found it at Moyer in PA. Did not see right one on Ebay. Now, back to work on the CTC9. The set is now working with good picture and B/w tracking. Color has issue, Only red in picture shows up, Need to get the scope out Findm-Keepm 09-30-2010, 07:29 PM Just curious, did you find the exact RCA part or the Workman replacement? Tried Moyers and eBay myself with no luck either! Cheers, rcafan 10-01-2010, 12:26 PM Moyer says they have the RCAFR291 in stock , the replacement for the original #107291. They took my $4.80, I hope I get it. julianburke 10-03-2010, 04:11 PM It doesn't really matter what the "cold" resistance is as it should be high but linearly goes to almost zero ohms when hot. This is so the degausser can do its' thing before the tube lights up and then is effectively cut out of the circuit by shorting out the degaussing coil. I would say there are several varistors you could use with good results. Findm-Keepm 10-03-2010, 08:49 PM Moyer says they have the RCAFR291 in stock , the replacement for the original #107291. They took my $4.80, I hope I get it. Thanks for the info - I grabbed two Workman FR291's from a different vendor. Moyers are good folks, and I've bought stuff from them before, but I needed a cheater cord and grabbed some caps and thermistors ($3.30 each) while I was at it. Cheers, rcafan 10-04-2010, 04:13 PM The thermistor arrived today and I was very supprised that it was the original RCA pack with the RCA number, I should have ordered a couple Findm-Keepm 10-08-2010, 08:06 AM Were they 107291 or 107191? I've found the 107191, and the vendor says they have plenty, not sure of price yet. My FR291's arrived today - got a spankin new Belden Cheater cord too! Cheers, rcafan 10-08-2010, 08:44 PM Received 107291. original RCA part envelope |