Sitting just 2 houses down from where I live. Saw the green halo around the edge of the CRT and knew it was old. A couple dates written on the back are both from 1971. Decided to bring it home for two reasons, one to see just what I found, and two, maybe someone here may want it?

http://i119.photobucket.com/albums/o121/mrx3750/Maggie1.jpg

http://i119.photobucket.com/albums/o121/mrx3750/Maggie2.jpg

All I know is it's a Maggie that's old enough to drink and then some. I didn't want to see it go to the dump. I'd like to see it go to someone who would care more about it then I do. A neighbor said it still works, but the cord was cut, and I don't wanna chance plugging it in anyway for fear of very old caps failing or something along those lines.

Nice! It looks like a remote set. I have a '68 T933 chassis magnavox that needs a recap and I need to get back on it.

Nice looking set, I hope it finds a good home.

Nice! It looks like a remote set. I have a '68 T933 chassis magnavox that needs a recap and I need to get back on it.


There is a switch on the back for remote control.

Where might this set be? I mean, what city?

I had a set with a similar cabinet for several years in my bedroom on top of a dresser. Those 6X9 speakers sounded great!

magnvox had the most ornate and fine looking cabinets.that is a pretty decent set.any hybrid or early solid state is really decent quality.that set should be a keeper!

Where might this set be? I mean, what city?


The motor city...

magnvox had the most ornate and fine looking cabinets.that is a pretty decent set.any hybrid or early solid state is really decent quality.that set should be a keeper!

Yeah I'm sure it's a decent set, which is why I don't want it to end up getting crushed in a garbage truck. I plan on holding onto it for a couple weeks and see if I can get someone here to take it. I don't have room for the darn thing and tube TV's don't really catch my interest.

Unfortunately too far for me. My other half is from Detroit.

I remember my Maggie having a bad focus resistor when I got it. The then owner didn't think it was worth a repair, but it was, and I got about 8 years out of it before the flyback cooked.

Holmes, you're closer that I am!

Go for !!

:D

You need a color Maggie to go with that B&W

I like the Maggie cabinets as well, plus they had good sound systems, on the consoles they would use the stereo amp for TV sound, many of my other make of consoles seem to skimp there and just use the little built in speaker for the TV, rather than use the stereo speaker and amp.

There is a switch on the back for remote control.

On the remote amp box to the left of the chassis, is there a remote gain control? If so, with the set working, you could crank that thing up and jingle car keys to change channels. My TV-repairman-Dad demonstrated that with a customer once - and Dad went back a few months later to replace the pot - the customer had duplicated the "trick" a few times for friends and family and destroyed the pot in the process.

The HV rectifier cup/socket on those was very prone to arcing. I'd clean it up good with some alcohol and let it dry out before I fired that sucker off. Eby made the cups/socket - either pink or green in color. They are still around (http://www.ebycompany.com/), making all sorts of sockets and assorted hardware for the electronics industry. An American company that didn't sell out or outsource to the Asians!

Great Maggies they were (and could still be!)

Cheers,

i had a sylvania superset (E-48) remote that i used my keys to operate.it was wild and my kids were wee folk then.they thought i was "magic dad" for a long time.but then again,i would perform "magic" in the car at redlights and make then turn green too.
a zenith clanger remote would work on the sylvania too.i used one for a year or two until my oldest son dropped it in the bathtub.i couldnt perform "magic" on that.they started to suspect something right about that time.

If anyone's willing to come get it, shoot me a PM. Yeah I think it could be a great set. That green halo would drive me insane if I kept the thing for myself. I know it's the safety glass separating from the CRT and can be fixed, but I do not have the time, know how or tools to fix this issue myself. Best that I give it to someone who has the time, know how and tools to restore it.

If you are in the Detroit area, I can give it a good home!

If you are in the Detroit area, I can give it a good home!

PM sent.

Our vacuum cleaner used to make our Sylvania Superset change channels. However, the TV never took revenge on the Hoover.

I had a 19" Zenith CCII that used a mechanical clicker remote. Once I fixed the TV, I stuck it in my Dad's basement woodshop (I was about 14 at the time). The first time my Dad turned on one of his saws, it turned on the TV. When I got home from school, I had to explain to him why his saw was able to turn on the TV.

That looks a lot like my '68 Maggie console.

Wow! Beautiful set! Wish I could find a console out this way thats not a combo unit..

Well, it's g9one to a good home, and I got a little something in return. Thanks captainmoody!

I'll post about my little score here pretty quick...

Cool, sounds like it may have found a home.

The Magnavox turned out to be a very nice find. (thanks Josh!) It appears to have been manufactured in March, 1969 and looks to have all original tubes and still works! I had to replace the cut cord and that was it.
Another note, the "quick picture" switch was in the "on" position still! Either the set spent a lot of time unplugged, or the original crt is really tough!

nice picture on that maggie!great save!

The Magnavox turned out to be a very nice find. (thanks Josh!) It appears to have been manufactured in March, 1969 and looks to have all original tubes and still works! I had to replace the cut cord and that was it.
Another note, the "quick picture" switch was in the "on" position still! Either the set spent a lot of time unplugged, or the original crt is really tough!

Wow it's still alive!

(No variac powering up, or too new for that...?)

Nope. On this one I Just plugged 'er in and powered her up.

Nice to see that the picture tube is still good on an instant-on set.

Hey, a color Maggie from '69 is NOT a bad thing! Very nice.

I saw it in person, it's very nice. :thmbsp:

I saw it in person, it's very nice. :thmbsp:

It pays to have a little pickup truck.

I just saw the halo around the CRT and knew it was old. Brought it home hoping that an AKer would want it. Feels good to know I saved one from the jaws of the trash truck.

The Magnavox turned out to be a very nice find. (thanks Josh!) It appears to have been manufactured in March, 1969 and looks to have all original tubes and still works! I had to replace the cut cord and that was it.
Another note, the "quick picture" switch was in the "on" position still! Either the set spent a lot of time unplugged, or the original crt is really tough!

That Didn't suprise me that it still worked. that particular chassis was really well designed. the only weakness that they had was with bad solder joints & some of the tube sockets that were mounted on the pcb's were prone to deterioration.