http://cgi.ebay.com/RCA-TV-Vintage_W0QQitemZ320224029486QQihZ011QQcategoryZ36 38QQssPageNameZWDVWQQrdZ1QQcmdZViewItem

Looks like a great candidate for restoration.

http://i15.ebayimg.com/02/i/000/de/73/c270_1.JPG

I think that is a CTC-9 "Anniversary" model.

Steve

It's hard for me to tell the difference between the two. I don't see much of either often :D

That's a cool looking set.

That's most definitely a CTC 9 Anniversary model. It's potentially a great performer. See attached photo of my Anniversary Model set. Bob.

nice tv , great job

They never show up where I can get 'em! Always too far away. {rolling eyes}

Bob: Which CRT is in your 9? The picture is spectacular!
Kevin

isnt polarman in ga?

Hi Kevin;
I'm not 100% sure, but I believe the crt is the original RCA tube (21CYP22). It is an RCA tube, that much is still printed on the socket. While working on the set I took a good look at the tube and couldn't find the number. I'm thinking maybe it was stamped on the neck and was removed by accident at some point. I saw no evidence that the tube had ever been replaced. It was a very lazy tube and took a long time to come around when I first began this project. I was concerned that I would need to locate a replacement, but once it woke up...there was just no stopping it. Bob

It was a very lazy tube and took a long time to come around when I first began this project. I was concerned that I would need to locate a replacement, but once it woke up...there was just no stopping it.

Hi Bob, hi folks!

Keep this in your mind! This seems to be very common with tired tubes of this age!

Congratulations to your wondeful set. The design is one of the best ever made!

- Eckhard

isnt polarman in ga?


Last I heard he was back in Texas, but he was never afraid to travel for something like this!

That set is not far from me, i was gonna take a chance at it, but it seems the seller has ended the listing early.

error in minimum bid listing? perhaps he'll re-list it for less :scratch2:

Hi Kevin;
I'm not 100% sure, but I believe the crt is the original RCA tube (21CYP22). It is an RCA tube, that much is still printed on the socket. While working on the set I took a good look at the tube and couldn't find the number. I'm thinking maybe it was stamped on the neck and was removed by accident at some point. I saw no evidence that the tube had ever been replaced. It was a very lazy tube and took a long time to come around when I first began this project. I was concerned that I would need to locate a replacement, but once it woke up...there was just no stopping it. Bob

Bob,

The 21CYP22A, a glass tube, would have the dual high voltage connectors, with a resistor between them, on the bell of the tube.

-Steve D.

YES: This set has the CTC-9 chassis, Like my 59 Boswell that I am having snaking problems with. Someone could have gotten it for 150.00, before it was removed. chipper

It's back.....

http://cgi.ebay.com/RCA-TV-Vintage_W0QQitemZ320225602112QQihZ011QQcategoryZ36 38QQssPageNameZWDVWQQrdZ1QQcmdZViewItem

Wow!!! According to "a collector of many years.......there are only seven others known to exist"!! :D
Bob.

Maybe he just means that that collector only knows of seven others. :)
To make matters worse he plugged it in and tried it.

Bill R

I sent him a note earlier saying 1) don't turn it on, and 2) can you get a CRT tester on it?

Now we see the idiotic response.

"I'm so stupit, I'm Oh-So Stoo-pit...." Grrrrr....

Well, I dunno if I am stupid or not for doing this but I won the bidding on the CTC-9 in GA. :scratch2:

It is a freaking lot to pay and I will have to sell a couple of things on the bay to make up for it...but I have been wanting one of these sets for a long, long time. :banana::yes:

A nice long 12 hour road trip one way to boot, but she is going to be mine. :smoke:

Roy

Congrrats! I was considering bidding but then when I looked at the condition of the top of the cabinet and decided to take a pass.
Does anyone know for sure if this set has a real veneer cabinet, or is it one of those photographic fake woodgrain finishes??????

Those photo finishes are so hard to repair. However, I have an artist friend and I am going to have him see if he can replicate the damaged areas on my CTC5, using tiny artist paint brushes and paint the missing areas to match. Then I will overlay with clear coat until the surface is level and then spray a coat of acrylic lacquer over the entire cabinet so it all matches. If it works out I will report on it here on AK. If the technique is a flop, then I wont waste anyones time telling about it.

Congrrats! I was considering bidding but then when I looked at the condition of the top of the cabinet and decided to take a pass.
Does anyone know for sure if this set has a real veneer cabinet, or is it one of those photographic fake woodgrain finishes??????

Those photo finishes are so hard to repair. However, I have an artist friend and I am going to have him see if he can replicate the damaged areas on my CTC5, using tiny artist paint brushes and paint the missing areas to match. Then I will overlay with clear coat until the surface is level and then spray a coat of acrylic lacquer over the entire cabinet so it all matches. If it works out I will report on it here on AK. If the technique is a flop, then I wont waste anyones time telling about it.



Hi;
I can tell you for sure that it is a photofinish on the "Anniversary" model set. Lucky for me that my set (also the "Anniversary" model) was in fairly good condition. When I first got the set I was considering trying to redo the finish but after some heavy duty compounding, polishing, and filling in the light spots with a dark wood color marker, the end result was quite acceptable.

Bob

Well, there is no question that it will be a challenge. I have been looking into wood veneers that I may have to use to bring that back. I know it would be preferable to keep the photo finish but this to too grand of a lady to let her look so rough.

I will just have to see once I can actually lay my own eyes on it. Snapshots rarely show things accurately, but that being said...the top is a mess.

And it is not the end of the world if there is a veneer of nice wood that somewhat replicates that of the original finish. While it would not be original, it would be preferable to the current look of a trashed up top.

Roy

I hope it didn't get "blowed away" in the round of tornados bangin' thru Jawja last couple of days...they "Tore up Jack" in Atlanta...

Roy,

Not to rain on your parade, bad pun, I know.
I hope, because of the unstable weather, you have a closed van. Curious if you figured in the current outrageous price of gas and other expenses in making the trip from Okla.City to Atlanta when you made your final bid? Have a safe trip and take some rest breaks.

-Steve D.

Fortunately the set is about 70 miles North of Atlanta near the Tennessee border.

Roy

Well, I dunno if I am stupid or not for doing this but I won the bidding on the CTC-9 in GA. :scratch2:

It is a freaking lot to pay and I will have to sell a couple of things on the bay to make up for it...but I have been wanting one of these sets for a long, long time. :banana::yes:

A nice long 12 hour road trip one way to boot, but she is going to be mine. :smoke:

Roy

How do you get from OK city to 70 miles north of Atlanta in only 12 hours? I need to know that route. I live in Jackson TN and I have family in Oklahoma. It is a good 8 hours from Memphis to Oklahoma city. That trip will be more like 14 to 15 hours one way. Assuming you go through Chattanooga TN, and you don't stop for food. You can take 78 out of Memphis, but it will make the trip about 18 hours long, I don't care what mapquest says. Unless you know a good short cut. :)

Bill R

Well, we will see on the trip time. Nothing is for sure until you are actually on the road.

I made it to Denver in 9 hours with a 1 hour stop. But I do drive 80-85 on average and the radar det is my best buddy on the road. :D

But even then, I will be traveling through some pretty country and one of my favorite sayings is "the journey IS the destination.":smoke:

Roy

Not to rain on your parade, bad pun, I know.
I hope, because of the unstable weather, you have a closed van. Curious if you figured in the current outrageous price of gas and other expenses in making the trip from Okla.City to Atlanta when you made your final bid? Have a safe trip and take some rest breaks.

-Steve D.

Steve,

I do indeed have a closed van, a 2008 Toyota Sienna and it gets pretty good mileage. It only took 3 20 gallon tanks to go to Denver, play around and come back and the milelage is not too much worse going to Ellijay, GA. But I did figure the gas price at $3.50 per gallon to give myself some cushion. I won't be able to pick up the set until April so I hope the gas prices are too much higher than that at that time. :eek:

I will take a rest break or two and I have a friend going with me so we can tag team the driving.

I am looking forward to rescuing this sweet ol set.

I would keep regular correspondence with the seller so that he won't toss it.

I've had this happen to me twice. I purchased something on ebay and explained to the seller that I couldn't pick it up for at least 3 weeks. He said that was ok and I thought that was that. sure enough when I went to go get it it had either been tossed out by his wife tired of waiting or someone else had offered him more for it in the meantime.

In both cases I got my money back, but you can still never be too sure

This is a true possibility. But I don't think there are too many opportunities of insane people paying that amount for that set. :D

And hopefully, since the seller has a good feedback rating, that is some sort of indication. He has been in contact with me and I will be using ***pal to pay for it giving me some protection.

I do hope it all goes smooth. Just out of curiosity, I listed it on UShip.com to see if anyone who is coming my way may want to make some bucks by picking it up. I did this with a Zenith Chromacolor II out of CA for the cost of gas and it worked...so this may save me a drive. :yes:

I really want to go back to Denver over Atlanta. I am from Panama City, FL and have seen the South pretty well. I didn't get to spend enough time in Denver checking out all the railroads, etc.

Roy

I hated to do it but after email & voicemail communication from the seller, I felt there was something terribly wrong.

I may be wrong but I felt that I was about to lose a lot of money and have nothing to show for it.

My gut instincts are often correct enough for me to trust them and sadly I walked away from this set.:tears:

I thought I had finally gotten hold of a ctc-9. :no:

I am disgusted with the whole ebay experience.

I'm sorry to hear that. If there are transactions like this sometimes its best to either give a small down payment in order to secure what you've bought, then give the rest in cash later.

Give it some patience, you'll get one.

Think you did the right thing. That was simply too far to go, in time & money only to be disappointed...

Interesting to note the only thing that seller currently has up is a book: "Handwriting Analysis and Detection of Deception." Hmmmm.....

Thanks everyone.

This was a bummer but who knows, something better may be just waiting around the corner.

I know many of you have been down this kind of road a time or two and I am really glad there is a place that I can go and know there are people who understand the passion of collecting and saving these sets and the pitfalls that sometimes go with the insanity.

Did I say insanity? I meant hobby...that's right...insan...uh...hobby.:D

purchased in 1963 for $100.
21CYP22 replaced with 21FBP22 Rare earth around 1974.
Last time turned on was 1976, worked then, but I could not stand the round picture after getting a new solid state quasar.
Have the remote, could not stand using it because it was so slow.

...

Guys, remember the rules. You can't post "for sale" items in threads. It has to go in the classifieds. If you don't take it to PM, the thread will get locked down.

eberts, nice set btw.

It's back, AGAIN!!

http://cgi.ebay.com/RCA-TV-Vintage_W0QQitemZ320230690394QQihZ011QQcategoryZ36 38QQssPageNameZWDVWQQrdZ1QQcmdZViewItem

He added some new pictures of the inside and it looks like a basket case to me. very poor condition. most I would pay for that set in unknown condition is 100.

As we say down here, "Been rode hard 'n' put up wet a few too many times"...

"I put a vcr on it yesterday and tried to get it to play but couldn't get it to work"

I'm Stupefied! I mean, with the obvious "kid glove" treatment that things had, it MUST to be something MINOR! Maybe he just didn't have it plugged in all the way? Looks like his dog arced a whiz on the grill cloth three times...

its a rust bucket, beat up lookin' and he wants how much? 350?

He's outa his feckin mind.

At least the CRT looks to be intact...

It's back again, ooooohhhhh and with a threat than if it doesn't sell it will not be relisted! Ok OK calm down! calm down! plenty of bids too go around. A shame really, it could make a ok set with a lot of work. (too much for me)

I can't believe this:

http://cgi.ebay.com/RCA-TV-Vintage-CTC9-Anniversary-Model_W0QQitemZ320240496463QQihZ011QQcategoryZ3638 QQssPageNameZWDVWQQrdZ1QQcmdZViewItem

I thought he said last time that it would not be relisted. Well, well, well! You'd think he'd get a clue by now that it's not going to bring a fortune like he thinks it will.

Some people are so determined to make a fortune on this stuff... After all that I'd just want to sell it quickly and move on, or keep it and restore it.

I've gotten so I don't keep re-running stuff on epay. I'm about to the point that if it does not go the first time; I'll keep it. Paying listing fees gets old real fast.

---

greedy lil sumbitch, isn't he?

---

yes, but what is his reserve? The last time he had it listed the reserve was 350.

I'd gladly pay 150 for it too, but not much more in that questionable condition.

Funny thing is, he had a bin for $150 at first,