View Full Version : Lookin' for a Sams


Cory
12-07-2003, 11:04 PM
Hey Guys,

Well, I finally found time to get one of my corner '58 RCAs up and running, could use a new pic tube though but looks fair enough at lower brightness.

So then I thought I'd tackle this other RCA that has been a royal pain the last couple years. I had recapped it last year which cured a couple vertical problems but at the same time threw off the hor speed. I just can't seem to get it close to locking in. (I'm finding these late 50s RCAs are a little pickier in their horizontal)

Anywho, would anyone out there happen to have the Sams for a KCS104k? I'd really like to get this beast going! :)

Thanks guys!
Cory

Eric H
12-08-2003, 02:16 AM
Hi Cory,

What number CRT does that set use? I have a good 21" tube I pulled from an RCA years ago. I can't recall the number right off but it's a 90 deg large neck tube.

Chad Hauris
12-08-2003, 06:53 AM
Cory, I have almost all photofacts from 1-900 so I should be able to make a copy if you can't get the original.

Cory
12-10-2003, 02:02 AM
Her Eric, too bad, this is a 21DFP4 110 deg tube.

I tell you, these pesky RCAs...:p:

Chad, I just sent you a PM...

Cory