|
View Full Version : Need Emerson schematic Eric H 11-09-2003, 05:38 PM The Sam's I have (46-25) for my Emerson 571 is for an earlier/later chassis and doesn't show the ballast tube. Does anyone have a different schematic for this set that does show the ballast? I could use a scan of the power supply section. Eric Steve K 11-09-2003, 06:12 PM Eric: Is this the one you need? Steve Steve K 11-09-2003, 06:16 PM Now it would probably help to have the values! R47 and R48; 10 ohm 3 watt wirewound R49 and R50; 75 ohm 5 watt wirewound R103; 75 ohm 3 watt wirewound Eric H 11-09-2003, 07:53 PM Steve, that's it! Thanks a million! :D Eric wiseguy 11-11-2003, 02:25 PM hi eric,i found that ballast,it is the correct one you need,and is brand new in the box,nice and black and shinny..! i checked the pins to make sure.. sorry it took me a few days to dig and find it,i will send it to you.. terry Eric H 11-11-2003, 03:32 PM Thank you Terry, that will make the job so much easier if I don't have to hang a bunch of resistors all over the place :) |