veg-o-matic
04-25-2007, 09:47 AM
Finally.
This is the 1970 Sears set I got from Canada a few months ago. The last problem I had with it was that the HV would die out after about 15 minutes. Turns out that either the new HV rectifier I installed was bad, or it went bad that time I accidentally defibrillated myself...:D
Anyway, here's the After picture; I can't find a Before pic anywhere. The picture isn't really blue like that; I should have turned off the light before taking the pic. The convergence isn't perfect, but it's good enough. There's some pincushion at the top that I can't adjust out with the two pincushion controls, but I'll worry about that later. Might have to fiddle with the linearity, too.
veg
FOLLOWUP: Well, I seem to be having trouble uploading pictures so I'll try again later.:tears:
This is the 1970 Sears set I got from Canada a few months ago. The last problem I had with it was that the HV would die out after about 15 minutes. Turns out that either the new HV rectifier I installed was bad, or it went bad that time I accidentally defibrillated myself...:D
Anyway, here's the After picture; I can't find a Before pic anywhere. The picture isn't really blue like that; I should have turned off the light before taking the pic. The convergence isn't perfect, but it's good enough. There's some pincushion at the top that I can't adjust out with the two pincushion controls, but I'll worry about that later. Might have to fiddle with the linearity, too.
veg
FOLLOWUP: Well, I seem to be having trouble uploading pictures so I'll try again later.:tears: