WTB: Cabinet for a TV

[tvcollector]

I'm looking for a cabinet for a RCA CTC16 color roundie I'm looking for either a metal table top cabinet or a small console (plain, nothing fancy) the cut out would have to be 28 x 20.5 to fit the whole front of the chassis.. If anyone has a cabinet like this lying around and have no use for it, I would be interested in buying it from you, and will pay for the shipping too.. Please let me know...

The chassis is the same exact in these videos and the cabinet in one of these videos would be perfect

http://www.youtube.com/watch?v=V2uHthZPsVU

http://www.youtube.com/watch?v=6DK0K_Y_Wrk

Thanks..

[mstaton]

That's too bad, I just junked a 16 small wood cabinet.

[tvcollector]

Oh damn, sounds like something that would have been perfect..

[snelson903]

i might have what you need,i have several choices to. i need two make one a parts doner ,my choices are a 65 zenith metal cabinet 20.5 x 30 i would need the bezel and tuner face to on that one, i have zenith 70's 20x39 needs top only repaired / replaced rect. shape tube bezel type , magi 20x 32 i think roundie type , i have a couple more maybe you can help me deside what i going to keep and work out what you need.

[snelson903]

ok this is the rca mini console 16x28 o.d. has back to it.the rca has a metal bottom also.

[snelson903]

next is the zenith metal cabinet ,that im [ vary fond of keep in mind ] o.d. 19.5x30 all have nice complete backs to them

[snelson903]

next up is the magi 19x32 o.d. has back

[Electronic M]

Originally Posted by snelson903

next is the zenith metal cabinet ,that im [ vary fond of keep in mind ] o.d. 19.5x30 all have nice complete backs to them

Man, I've been wanting one of those for a while; it would be a shame to see a nice Zenith like that parted out.

[tvcollector]

I like them all, but I do like the magi better.. Now is that the dimensions of the whole cabinet or is it the cut out where the mask fits?

[Big Dave]

I have a cabinet that housed a 16. I also have the bezel. It's an exact match. PM with any questions.

[snelson903]

Originally Posted by tvcollector

I like them all, but I do like the magi better.. Now is that the dimensions of the whole cabinet or is it the cut out where the mask fits?

i want you to like the magi ,the zenith would probley be costly

[snelson903]

ill probley keep the metal zenith complete, im picking up another metal cabinet rca color roundie this weekend

[tvcollector]

Very nice set, and great job....

[Electronic M]

Originally Posted by snelson903

just finishing up on my 55 zenith after complete recap and few other parts,going over adjustments letting the new caps form ,getting it warm.

This post looks out of place here.....

[snelson903]

ok cabinet is bare ,where the picture tube bezel mounts ,inside open measures 17"3/4 x 28"1/8 now the Lip where the bezel bolts to or sets down in is 19"1/2 x 29"1/2 and the small partition board is only screwed in .