Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Solid State CRT Televisions

We appreciate your help

in keeping this site going.
Reply
 
Thread Tools Display Modes
  #1  
Old 01-21-2018, 10:20 AM
old_tv_nut's Avatar
old_tv_nut old_tv_nut is offline
See yourself on Color TV!
 
Join Date: Jul 2004
Location: Rancho Sahuarita
Posts: 7,184
Motorola Works-in-drawer CRT dimensions

I'd like to know what the actual height and width (not just the diagonal) of the bezel opening or CRT face was in the Motorola solid-state works in a drawer sets.

Does someone have a set they can measure, or can someone give the CRT type number or a link to a spec sheet?
__________________
www.bretl.com
Old TV literature, New York World's Fair, and other miscellany
Reply With Quote
  #2  
Old 01-21-2018, 10:54 PM
old_tv_nut's Avatar
old_tv_nut old_tv_nut is offline
See yourself on Color TV!
 
Join Date: Jul 2004
Location: Rancho Sahuarita
Posts: 7,184
OOPS - This should have been in solid-state CRT TV's - can a mod move it please?
__________________
www.bretl.com
Old TV literature, New York World's Fair, and other miscellany
Reply With Quote
  #3  
Old 01-22-2018, 08:06 PM
dieseljeep dieseljeep is offline
VideoKarma Member
 
Join Date: Jul 2010
Posts: 7,562
Quote:
Originally Posted by old_tv_nut View Post
OOPS - This should have been in solid-state CRT TV's - can a mod move it please?
All the WID sets using the TS915 all solid state chassis seemed to use a 23V type CRT, as the 25V's weren't out yet.
The 68 to 70 model years used a 25Xp22 or a 21AP22A, Generally an RCA or Sylvania sourced CRT. The WID sets were TOTL models using the better cabinets and were higher priced than the rest of the Motorola line that used the cheaper Admiral or NVC CRT's.
Reply With Quote
  #4  
Old 01-22-2018, 09:05 PM
Eric H's Avatar
Eric H Eric H is offline
Administrator
 
Join Date: Jun 2002
Location: So. Calif
Posts: 11,565
Moved to SS as requested.
Reply With Quote
  #5  
Old 01-22-2018, 10:33 PM
old_tv_nut's Avatar
old_tv_nut old_tv_nut is offline
See yourself on Color TV!
 
Join Date: Jul 2004
Location: Rancho Sahuarita
Posts: 7,184
Quote:
Originally Posted by dieseljeep View Post
All the WID sets using the TS915 all solid state chassis seemed to use a 23V type CRT, as the 25V's weren't out yet.
The 68 to 70 model years used a 25Xp22 or a 21AP22A, Generally an RCA or Sylvania sourced CRT. The WID sets were TOTL models using the better cabinets and were higher priced than the rest of the Motorola line that used the cheaper Admiral or NVC CRT's.
That's a start. I'm trying to find actual dimensions to see if the aspect ratio was exactly 4x3 or something close.
__________________
www.bretl.com
Old TV literature, New York World's Fair, and other miscellany
Reply With Quote
Audiokarma
  #6  
Old 01-22-2018, 11:08 PM
maxhifi's Avatar
maxhifi maxhifi is offline
VideoKarma Member
 
Join Date: Dec 2010
Posts: 1,841
H- 15 7/8
W- 20 3/8
D - 23 5/8

This is for the visible part of the picture tube, inside the bezel. Ratio is 1.28:1, versus 4:3 being 1.33:1.

It's possible my bezel is a bit distorted, it's 50 years old after all!
Attached Images
File Type: jpg DSC_0347-1024x578.jpg (41.3 KB, 29 views)

Last edited by maxhifi; 01-22-2018 at 11:11 PM.
Reply With Quote
  #7  
Old 01-23-2018, 10:28 AM
old_tv_nut's Avatar
old_tv_nut old_tv_nut is offline
See yourself on Color TV!
 
Join Date: Jul 2004
Location: Rancho Sahuarita
Posts: 7,184
Thanks. I had a vague memory that color CRTs might have been made a bit narrow to allow longer horizontal retrace time (thus cropping off some of the picture) without distorting the aspect ratio of the picture content. Why longer retrace? To reduce peak pulse voltages in the horizontal output device. I do know that the Motorola solid state sets used extra-long horizontal retrace times for this reason, but have (or had) no sure evidence that the CRTs were made narrower to compensate.

If your numbers are accurate, this is a 4% reduction in trace time; this would allow retrace to increase by about 2 microseconds (20%), which would be significant.

A physical spec sheet for the CRT would settle this.
__________________
www.bretl.com
Old TV literature, New York World's Fair, and other miscellany
Reply With Quote
  #8  
Old 01-23-2018, 03:03 PM
maxhifi's Avatar
maxhifi maxhifi is offline
VideoKarma Member
 
Join Date: Dec 2010
Posts: 1,841
Mine has a 25AP22A

Here's the data sheet, scroll down for dimensions.

Aspect ratio though, is 19.844/15.562 = 1.28, which is consistent with my set, and also with your ideas about TVs being slightly narrower than 4x3. Also, if you think about it from test patterns and such, it does always seem like more is cut off on the sides than on the top and bottom. This is a typical CRT size, the 25XP22A in my RCA CTC38 has the same dimensions, and that's a tube TV. Makes me wonder about other brands.

https://frank.pocnet.net/sheets/202/2/25AP22.pdf
Reply With Quote
  #9  
Old 01-23-2018, 03:41 PM
old_tv_nut's Avatar
old_tv_nut old_tv_nut is offline
See yourself on Color TV!
 
Join Date: Jul 2004
Location: Rancho Sahuarita
Posts: 7,184
Thanks!

The bulbs would have been made by one of the large glass companies, and therefore may have had identical aspect ratios for several brands/type numbers of CRTs.
__________________
www.bretl.com
Old TV literature, New York World's Fair, and other miscellany
Reply With Quote
  #10  
Old 01-23-2018, 03:50 PM
maxhifi's Avatar
maxhifi maxhifi is offline
VideoKarma Member
 
Join Date: Dec 2010
Posts: 1,841
I should add, that it looks like the bezel is warped in the photo I took of my TV, but in reality it is perfectly straight - what you're seeing is geometric distortion from my cheap Sony Xperia phone camera lens.

I suppose that the conclusion here, is that old TVs are even less suitable for modern 16x9 programs than we hoped!
Reply With Quote
Audiokarma
  #11  
Old 01-23-2018, 05:23 PM
Jon A.'s Avatar
Jon A. Jon A. is offline
Don't mess with Esther.
 
Join Date: Jun 2013
Location: Canada
Posts: 4,267
Quote:
Originally Posted by maxhifi View Post
I should add, that it looks like the bezel is warped in the photo I took of my TV, but in reality it is perfectly straight - what you're seeing is geometric distortion from my cheap Sony Xperia phone camera lens.
You'd probably get the same thing with anything less than a DSLR. Getting straight lines to look reasonably straight in many photos is VERY difficult even with my 4-year-old Canon PowerShot 340HS.
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 03:40 AM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.