#1
|
||||
|
||||
Chasing down interferance
I've been using my antique radios lately, and it had got to the point where AM was nearly unusable, due to buzzing and interferance.
I located the noise sources by shutting off one breaker at a time, until it went away. I ended up finding one grey market LED lamp, the treadmill, and the power supply to the Wii U. I also unplugged the computer. With all that done, reception is awesome now. If you're struggling with am reception, keep trying, it is possible to get it back. I can get stations which have been lost in noise for years, and the sound is good now. |
#2
|
||||
|
||||
I need to go on such a hunt soon. Lately, something has been intermittently interfering with the agile modulators I use to transmit to my TVs.
__________________
Tom C. Zenith: The quality stays in EVEN after the name falls off! What I want. --> http://www.videokarma.org/showpost.p...62&postcount=4 |
#3
|
||||
|
||||
It took less than an hour, I thought it would be really time consuming or difficult, but it was super easy, and the results are amazing. I had really written off using AM radio, and now it's back just like it was when I began this hobby.
|
#4
|
||||
|
||||
Quote:
What does the interference look like? |
#5
|
|||
|
|||
I'm an AM DXer. I found that my CPAP would make noise running and a power brick for my son's laptop would make weird noises. Interference looks like lots of dashed lines in motion.
__________________
Rick (Sparks) Ethridge |
Audiokarma |
#6
|
||||
|
||||
Quote:
Zenith had a device they called "the growler" for testing analog TV sync circuits. It was a metal box with RF input and output ports that contained a vacuum cleaner motor coupled to the signal. It had a two stage speed control circuit that cyclicly varied the speed of the motor and the rate of change of the speed, thus creating interference streaks that ran through all possible phases with respect to vertical and horizontal sync. Eventually, integrated analog sync circuits could sync up when the signal was so much smaller than the noise that you could not make out what the picture content was. |
#7
|
||||
|
||||
That's the second diagnostic tool use I've heard for the word "Growler" . In electric motor servicing there is a tool called the growler that will indicate shorted windings in a motor's armature . Since the electric motor servicing growler predates mass market TV , I believe the name of your device was borrowed from the original growler ...
|
#8
|
|||
|
|||
A buddy of mine was fond of complaining about how bad the RF interference is in town. 75-40 meters was basically unusable and 20 was pretty rough too. We got a battery for the radio and starting flipping breakers. Turned out he was generating most of the noise! He had all sorts of stuff that was interfering. Got most of it dealt with but he still likes to complain about "the noise in town".
|
#9
|
||||
|
||||
Quote:
|
#10
|
||||
|
||||
I once had an RFI problem that made SW listening unbearable. Located the problem at a street light with a bad sensor across the street. Got the city to change out the sensor and the problem went away!
__________________
Let me live in the house beside the road and be a friend to man. |
Audiokarma |
#11
|
|||
|
|||
#12
|
||||
|
||||
Quote:
|
#13
|
||||
|
||||
When the ATSC high def digital over the air systems were tested, one of the tests was a vacuum cleaner motor that made RFI. To see how well the transmission methods handled it.
__________________
|
#14
|
|||
|
|||
Quote:
The FM reception is great when the lights aren't on. |
#15
|
||||
|
||||
Quote:
__________________
Tom C. Zenith: The quality stays in EVEN after the name falls off! What I want. --> http://www.videokarma.org/showpost.p...62&postcount=4 |
Audiokarma |
|
|